氏名

ミヤシタ トモユキ

宮下 朋之

職名

教授 (https://researchmap.jp/read0200520/)

所属

(創造理工学部)

プロフィール

1992年 新日本製鐵株式会社 2000年 早稲田大学 理工学部 助手 2002年 茨城大学 工学部 助手 2005年 早稲田大学 理工学部 准教授 2010年 早稲田大学 理工学部 教授

連絡先

メールアドレス

メールアドレス
tomo.miyashita@waseda.jp
メールアドレス(その他)
tomo-miyashita@umin.ac.jp

住所・電話番号・fax番号

住所
〒169-8555東京都 新宿区大久保 3-4-1

URL等

WebページURL

http://www.miyashita.mmech.waseda.ac.jp(研究内容の説明)

http://www.miyashita.mmech.waseda.ac.jp/study.html

研究者番号
20329080
ORCID ID
orcid.org/0000-0002-3371-6182

本属以外の学内所属

兼担

理工学術院(大学院創造理工学研究科)

研究院(研究機関)/附属機関・学校(グローバルエデュケーションセンター)

学内研究所等

宇宙科学観測システム研究所

研究所員 2010年-2014年

次世代ロボット研究機構

運営委員 2017年-2018年

ヘルスケアロボティクス研究所

研究所員 2015年-

各務記念材料技術研究所

兼任研究員 2017年-2018年

理工学術院総合研究所(理工学研究所)

兼任研究員 2018年-

中部地域産業振興研究所

研究所員 2012年-2018年

宇宙科学観測研究所

研究所員 2015年-2018年

自動車用新材料および新製造プロセス研究所

研究所員 2016年-2019年

自動車用新材料および新製造プロセス研究所

研究所員 2019年-

学歴・学位

学歴

早稲田大学 理工学研究科 機械工学専攻
早稲田大学 理工学部 機械工学専攻
早稲田大学 理工学部 機械工学科

学位

博士(工学) 早稲田大学

経歴

新日本製鐵株式会社
早稲田大学理工学部機械工学科
茨城大学工学部知能システム工学科
早稲田大学世紀COE「超高齢社会における人とロボット技術の共生」研究員
早稲田大学GCOE「グローバルロボットアカデミア」研究員

所属学協会

日本機械学会

日本計算工学会

情報処理学会

日本応用数理学会

The International Society of Structural and Multidisciplinary Optimization

The American Society of Mechanical Engineers

The American Institute of Aeronautics and Astronautics

受賞

日本計算工学会奨励賞

2003年05月

IEEE ISATP2003 Best Paper Award

2003年07月

取材ガイド

カテゴリー
工学
専門分野
機械工学、振動工学、宇宙工学
キーワード
振動、衝撃、構造安全性

その他基本情報

1996年10月

システム監査技術者

研究分野

キーワード

設計工学、機械力学、材料力学、宇宙工学、宇宙構造物、数理計画法、最適設計、振動工学、構造同定、ロボット、人工衛星、自動車、探傷・点検

科研費分類

工学 / 機械工学 / 機械力学・制御

工学 / 機械工学 / 航空宇宙工学

工学 / 機械工学 / 設計工学・機械機能要素・トライボロジー

工学 / 機械工学 / 医用システム

工学 / 機械工学 / 知能機械学・機械システム

共同研究希望テーマ

機械構造物の動的応答を考慮した設計・最適化・満足化

目的:技術相談、受託研究、共同研究、その他

展開構造物の設計・評価

目的:技術相談、受託研究、共同研究、その他

衝撃作用下における車両構造の挙動・安全性の確保

目的:技術相談、受託研究、共同研究、その他

振動・騒音問題

希望連携機関:産学連携、民間を含む他機関等との共同研究等

目的:技術相談、受託研究、共同研究、その他

人体組織/構造の力学特性

希望連携機関:産学連携、民間を含む他機関等との共同研究等

目的:技術相談、受託研究、共同研究、その他

同定手法を活用したデータ・動作分析

目的:技術相談、受託研究、共同研究、その他

研究テーマ履歴

肺構造の虚脱変形予測と施術シミュレーションに関する研究

研究テーマのキーワード:肺,虚脱,有限要素法

個人研究

車両構造における衝撃伝達経路の検討

研究テーマのキーワード:車両, 衝撃, 伝達

個人研究

形状最適化による梱包材バラエティに関する研究

研究テーマのキーワード:最適化, 梱包材, 衝撃

食用材料による体内移動機械に関する研究

研究テーマのキーワード:体内移動, ロボット

個人研究

らせん折絆創膏の開発

研究テーマのキーワード:膜面, らせん折り, 絆創膏

機械構造物の分化と統合に関する研究

研究テーマのキーワード:構造物, 分化, 統合

市場データにもとづく寸法最適化・位相最適化に関する研究

研究テーマのキーワード:最適化, 市場データ, 構造

LCDパネルによる熱制御機構の性能評価

研究テーマのキーワード:LCD, 熱制御

インホイールモータを使用した車両構造の設計と開発

研究テーマのキーワード:モータ, 自動車構造

病変部の力学情報の相違による患部位置同定に関する研究

研究テーマのキーワード:癌, 打診

個人研究

管路へ伸展するワイヤの最適制御に関する研究

研究テーマのキーワード:管路,血管,ワイヤ,ステント,伸展

個人研究

テザー伸展機構の設計と開発

研究テーマのキーワード:テザー, 伸展, 宇宙, 姿勢制御

個人研究

膜構造の折り目の制御に関する研究

研究テーマのキーワード:膜面, 折り目, 特性同定

個人研究

深海探査機の開発

研究テーマのキーワード:深海, 機械

個人研究

曲面らせん折膜面の収納・展開に関する研究

研究テーマのキーワード:曲面, らせん折膜面, 収納, 展開

個人研究

曲面らせん折構造によるエアバックの展開性能の評価

研究テーマのキーワード:エアバック, らせん折り

個人研究

ヒンジレスマストによる伸展機構に関する研究

研究テーマのキーワード:弾性マスト, 伸展

個人研究

衛星構造の組立性評価と最適化設計
大型望遠鏡による衛星追尾機構の構築
月面における洞窟探査機器の開発

個人研究

閉鎖空間における長期滞在支援技術の構築
風車動力伝達部の最適設計
人工衛星の姿勢および軌道予測に関する研究
人工衛星の電力管理システムの最適化
格子投映法による膜面挙動の推定法
重量物可搬性を有する電動自転車の製作
ヒートシンクの最適設計に関する研究
光学架台の形状変形の精密制御
ブーム付き展開膜の特性把握とらせん折り収納技法に関する研究
Kinematic Couplingと摩擦(ガタ)が全体の形状精度に及ぼす影響の検討
宇宙構造物の動的応答の高精度な形状測定法に関する研究
大型柔軟構造物への微小擾乱の影響に関する研究

論文

衝突時における荷重伝達経路を活用した車両設計に関する研究

森崎 陽平;宮下 朋之

計算力学講演会講演論文集2014(27)p.191 - 1932014年11月-2014年11月 

CiNii

詳細

ISSN:1348026X

グラフィックスハードウエアを用いた高速位相最適化に関する研究

亀崎 浩輝;宮下 朋之

計算力学講演会講演論文集2014(27)p.232 - 2342014年11月-2014年11月 

CiNii

詳細

ISSN:1348026X

RFAにおけるFEMを併用したモデルベースト温度制御の基礎的検討

磯部 洋佑;渡辺 広樹;呂 筱薇;山崎 望;小林 洋;宮下 朋之;橋爪 誠;藤江 正克

Journal of Japan Society of Computer Aided Surgery : J.JSCAS15(2)p.136 - 1372013年08月-2013年08月 

CiNii

詳細

ISSN:13449486

非線形弾性に基づく乳がん診断支援システムの開発 : ロボットマニピュレータによる触診時の乳房変形解析

築根 まり子;小林 洋;宮下 朋之;白石 泰之;山家 智之;橋爪 誠;藤江 正克

Journal of Japan Society of Computer Aided Surgery : J.JSCAS14(3)p.206 - 2072012年10月-2012年10月 

CiNii

詳細

ISSN:13449486

熱伝導率と電気伝導率の空気量依存性を反映した肺のRFA用温度分布シミュレーションの構築

山崎 望;渡辺 広樹;磯部 洋佑;呂 筱薇;小林 洋;宮下 朋之;藤江 正克

Journal of Japan Society of Computer Aided Surgery : J.JSCAS14(3)p.278 - 2792012年10月-2012年10月 

CiNii

詳細

ISSN:13449486

有限要素解析と超音波画像の比較に基づく組織弾性同定法

星 雄陽;築根 まり子;小林 洋;宮下 朋之;藤江 正克

Journal of Japan Society of Computer Aided Surgery : J.JSCAS14(3)p.282 - 2832012年10月-2012年10月 

CiNii

詳細

ISSN:13449486

肝がんラジオ波焼灼療法における組織凝固指標の検討

呂 筱薇;築根 まり子;磯部 洋佑;山崎 望;渡辺 広樹;小林 洋;柿本 隆志;千葉 敏雄;宮下 朋之;藤江 正克

Journal of Japan Society of Computer Aided Surgery : J.JSCAS14(3)p.422 - 4232012年10月-2012年10月 

CiNii

詳細

ISSN:13449486

2208 人工衛星の機器配置を考慮した軽量化設計に関する研究(OS6-2 設計と最適化II)

水町 星哉;宮下 朋之

設計工学・システム部門講演会講演論文集2012(22)p."2208 - 1"-"2208-10"2012年09月-2012年09月 

CiNii

詳細

ISSN:13480286

概要:Recently the development of the nano satellite becomes active. In general, nano satellites are expected to be developed faster and cheaper than the large satellites. The launching cost of the piggyback satellite is reasonable, and then a cost of a piggyback satellite is often decided by weight. Therefore it is important to reduce the weight of satellite for cost. We have to design of satellite structure considering the severe mechanical environment of launching. The natural frequency of the satellite should be higher than the value decided by the rocket and the satellite should withstand the loads during launch. In addition, harnesses are also important component when we design satellites. In this paper, we will propose the design of the satellite whose dimension is 400 millimeters cube. The satellite supposed to be launched by H-2A rocket and we focused on the trade-off design between minimization of mass and maximization of natural frequency under the maximum stress condition for optimizing the satellite structures.

2309 コンプライアントメカニズムを用いた衝撃吸収構造の創成に関する研究(OS10 創発性と多様性の設計)

岡田 健太;宮下 朋之

設計工学・システム部門講演会講演論文集2012(22)p."2309 - 1"-"2309-10"2012年09月-2012年09月 

CiNii

詳細

ISSN:13480286

概要:In this study, to design a shock absorbing structure using the compliant mechanism. To be applied to the shock absorbing structure is necessary to consider the plastic deformation. However, in previous studies such research has not been done. In the present study to design a compliant mechanism targets the elasto-plastic body. And this mechanism is applied to impact-absorbing structure. First we use topology optimization whose object function is to design shock absorbing structure and compliant mechanism. And we can design model which has compliant mechanism and shock absorbing function. Secondly impact test is performed using this mechanism. We create a model for comparison for this test. We compare the behavior of each model and discuss about it.

3407 鉄道車両の衝突時における着座方式と乗客挙動の実験(GS-2 一般セッションII)

松田 淳;宮下 朋之

設計工学・システム部門講演会講演論文集2012(22)p."3407 - 1"-"3407-10"2012年09月-2012年09月 

CiNii

詳細

ISSN:13480286

概要:When major train collisions occur, train structure deforms to reduce the impact effect. However, some passengers are injured in spite of the shock absorption of the structure. Therefore, it is necessary to design train structure to reduce injuries of passengers when accidents occur. In this study, we proposed the design improvements strategies to reduce injuries of the passengers caused by train collisions. We experimented with scale-down models of passengers and vehicles. To evaluate injury levels, we used HIC36 as a standard for head injuries. As a result of these experiments, HIC36 is influenced by seating position and type. We proposed three train structures to reduce injuries of passengers. These are that of using convertible seats, seating passengers with their backs to the front of the train and seating passengers in the rear of the vehicle.

有限要素法を用いたRFA中の臓器内血流量推定手法の提案

渡辺 広樹;山崎 望;小林 洋;宮下 朋之;大平 猛;橋爪 誠;藤江 正克

Journal of Japan Society of Computer Aided Surgery : J.JSCAS13(3)p.286 - 2872011年11月-2011年11月 

CiNii

詳細

ISSN:13449486

肺臓内部空気を考慮した温度分布シミュレータによる肺臓RFAの焼灼範囲の検討

山崎 望;渡辺 広樹;関 雅俊;小林 洋;宮下 朋之;藤江 正克

Journal of Japan Society of Computer Aided Surgery : J.JSCAS13(3)p.292 - 2932011年11月-2011年11月 

CiNii

詳細

ISSN:13449486

肺臓のラジオ波焼灼施行中における電極針近傍の温度測定

山崎 望;渡辺 広樹;関 雅俊;小林 洋;宮下 朋之;藤江 正克

Journal of Japan Society of Computer Aided Surgery : J.JSCAS12(3)p.302 - 3032010年11月-2010年11月 

CiNii

詳細

ISSN:13449486

腫瘍の位置提示ナビゲーションシステムへの応用を目的とした肺の虚脱シミュレーション

小林 洋;吉澤 愛子;岡本 淳;宮下 朋之;山川 宏;藤江 正克

Journal of Japan Society of Computer Aided Surgery : J.JSCAS12(1)p.13 - 212010年03月-2010年03月 

CiNii

詳細

ISSN:13449486

概要:It is required to collapse a lung in VATS (video-assisted thoracic surgery). The tumor position is displaced corresponding to ling collapse. Then, navigation system, which presents the tumor position for a surgeon without any palpation process, may be effective for VATS. The purpose of this study is to develop the navigation system using the collapse simulation of lung. This paper shows a collapse simulation with a loaf lung, which has no lobatum, as a first step of this study. First, we obtained and modeled the material properties of hog lung from the data obtained by rheometer. The Zener's model was used to represent the viscoelastic properties of lung from the analysis of the data. Next, the biomechanical model of lung was developed based on Finite Element Method. The collapse simulation was carried out using the model. The analysis result shows the lung model was collapsing and the deformation had the similar tendency to real lung.

The Multi-objective collaborative design using data envelopment analysis

米国電気学会Proc. of IFIP20052005年07月-

Inverse Offset of Z-map Model for Process Planning Assistance

米国電気学会Proc. of ISATP20052005年07月-

The Multi-objective collaborative design using data envelopment analysis

Proc. of IFIP2005(IEEE)Proc. of IFIP20052005年07月-

Inverse Offset of Z-map Model for Process Planning Assistance

Proc. of ISATP2005(IEEE)Proc. of ISATP20052005年07月-

探索方向の傾斜によるPSO法の改良に関する検討

日本精密工学会春季大会講演論文集2005年03月-

GPUを利用した二次元応力場における簡易計算と最適化の検討

日本精密工学会春季大会講演論文集2005年03月-

力覚デバイスによる物体切断シミュレーション

日本精密工学会春季大会講演論文集2005年03月-

A Examination for improvement of PSO method considering Projection of Search Direction

JSPE Precision Engineering Conference (Spring) / JSPEProc. of JSPE Conf. (CD-ROM)2005年03月-

An Examination for structural optimization algorithm using GPU

JSPE Precision Engineering Conference (Spring) / JSPEProc. of JSPE Conf. (CD-ROM)2005年03月-

Cutting Simulation using Haptic Device

JSPE Precision Engineering Conference (Spring) / JSPEProc. of JSPE Conf. (CD-ROM)2005年03月-

A Study on Collaborative Optimization using Data Envelopment Analysis and Cutting Plane Method

日本・中国・韓国機械学会Proc. of CJK-OSM32004年11月-

An Application of Database For Design Optimization to Derive Quasi-Optimum Solutions

日本・中国・韓国機械学会Proc. of CJK-OSM32004年11月-

A Study on Collaborative Optimization using Data Envelopment Analysis and Cutting Plane Method

Proc. of CJK-OSM3Proc. of CJK-OSM32004年11月-

An Application of Database For Design Optimization to Derive Quasi-Optimum Solutions

Proc. of CJK-OSM3Proc. of CJK-OSM32004年11月-

面法線情報を伴うZ-マップ表現を利用した加工シミュレーションの高精度化

日本精密工学会秋季大会講演論文集2004年09月-

パラメータスタディツールの開発と基礎的検討

日本機械学会機講論  No.04-012004年09月-

An improvement of Accuracy of Cutting Simulation for Z-map expression using normal line

JSPE Precision Engineering Conference (Autumn) / JSPEProc. of JSPE Conf. (CD-ROM)2004年09月-

Development and Basic Study of Parameter Study tools

JSME Mechanical Engineering Congress /JSMENo.04-012004年09月-

Structural Optimization using Trade-off Satisficing Method

Int. Soc. Of MCDMProc. of Int. Conf. of MCDM2004年08月-

Structural Optimization using Trade-off Satisficing Method

Proc. of Int. Conf. of MCDMProc. of Int. Conf. of MCDM2004年08月-

データ包絡分析法による協調設計に関する研究

日本機械学会機構論  No.040-12004年03月-

最適設計におけるパラメータスタディツールの開発

日本機械学会機構論  No.040-12004年03月-

法線情報を伴う離散的形状表現のCAMでの利用

日本精密工学会春季大会講演論文集2004年03月-

A Study on Collaborative Design using Data Envelopment Analysis

JSME Mechanical Engineering Congress /JSMENo.040-12004年03月-

A Development of Parameter Study Tools for Design Opotimization

JSME Mechanical Engineering Congress /JSMENo.040-12004年03月-

An application of Discrete shape expression considering normal line information]

JSPE Precision Engineering Conference (Spring) / JSPEProc. of JSPE Conf. (CD-ROM)2004年03月-

離散的な形状表現に基づく幾何学的に滑らかな工具経路の生成

日本精密工学会秋季大会講演論文集2003年10月-

多様性を考慮したジョブショップスケジューリング問題の検討

日本機械学会機構論  No.02-012003年10月-

領域遺伝型遺伝的アルゴリズムの開発

日本機械学会機論(C) No.70-6952003年10月-

A Generation of geometoricaly smooth tool path based on discrete shape expression

JSPE Precision Engineering Conference (Autumn) / JSPEProc. of JSPE Conf. (CD-ROM)2003年10月-

An Examination on Jobshop Scheduling Problem in cosideration of diversity

JSME Mechanical Engineering Congress /JSMENo.02-012003年10月-

Development of Genetic Range Genetic Algorithms

Trans of JSME Series C/JSME70-695C2003年10月-

An Examination of Immune Algorithm for Structural and Production Design

ISSMOProc. of WCSMO52003年09月-

Errors in Optimization using the Response Surface Method and Resulting Physical Phenomena

ISSMOProc. of WCSMO52003年09月-

Range Zooming for Genetic Range Genetic Algorithms

ISSMOProc. of WCSMO52003年09月-

A Study on Immune Algorithms Considering Interaction of Design with Environment Properties

米国機械学会CD-ROM of DETC DAC488022003年09月-

Genetic Range Genetic Algorithm to Obtain Quasi-Optimum Solutions

米国機械学会CD-ROM of DETC DAC340512003年09月-

An Examination of Immune Algorithm for Structural and Production Design

Proc. of WCSMO5Proc. of WCSMO52003年09月-

Errors in Optimization using the Response Surface Method and Resulting Physical Phenomena

Proc. of WCSMO5Proc. of WCSMO52003年09月-

Range Zooming for Genetic Range Genetic Algorithms

Proc. of WCSMO5Proc. of WCSMO52003年09月-

A Study on Immune Algorithms Considering Interaction of Design with Environment Properties

Proc. of ASME 2003 Int. Design Eng. Tech. Conf. and the Comp. and Information in Eng. Conf.CD-ROM of DETC DAC488022003年09月-

Genetic Range Genetic Algorithm to Obtain Quasi-Optimum Solutions

Proc. of ASME 2003 Int. Design Eng. Tech. Conf. and the Comp. and Information in Eng. Conf.CD-ROM of DETC DAC340512003年09月-

Hollow shape extraction: Geometric method for assisting process planning of mold machining

米国電気学会ISATP20032003年07月-

An Application of Immune Algorithms for Job-Shop Scheduling Problems

米国電気学会ISATP20032003年07月-

Hollow shape extraction: Geometric method for assisting process planning of mold machining

Proc. of ISATP2003(IEEE)ISATP20032003年07月-

An Application of Immune Algorithms for Job-Shop Scheduling Problems

Proc. of ISATP2003(IEEE)ISATP20032003年07月-

データ包絡法を用いた協調設計システムの構築

日本精密工学会春季大会講演論文集2003年03月-

Automated palpation for breast tissue discrimination based on viscoelastic biomechanical properties

Tsukune, Mariko;Kobayashi, Yo;Miyashita, Tomoyuki;Fujie, G. Masakatsu

International Journal of Computer Assisted Radiology and Surgery10(5)p.593 - 6012015年09月-2015年

DOI

詳細

ISSN:1861-6410

Automated palpation for breast tissue discrimination based on viscoelastic biomechanical properties.

Tsukune Mariko;Kobayashi Yo;Miyashita Tomoyuki;Fujie G Masakatsu

Automated palpation for breast tissue discrimination based on viscoelastic biomechanical properties.10(5)2015年09月-2015年

DOI

詳細

ISSN:1861-6429

概要:PURPOSE:Accurate, noninvasive methods are sought for breast tumor detection and diagnosis. In particular, a need for noninvasive techniques that measure both the nonlinear elastic and viscoelastic properties of breast tissue has been identified. For diagnostic purposes, it is important to select a nonlinear viscoelastic model with a small number of parameters that highly correlate with histological structure. However, the combination of conventional viscoelastic models with nonlinear elastic models requires a large number of parameters. A nonlinear viscoelastic model of breast tissue based on a simple equation with few parameters was developed and tested.;METHODS:The nonlinear viscoelastic properties of soft tissues in porcine breast were measured experimentally using fresh ex vivo samples. Robotic palpation was used for measurements employed in a finite element model. These measurements were used to calculate nonlinear viscoelastic parameters for fat, fibroglandular breast parenchyma and muscle. The ability of these parameters to distinguish the tissue types was evaluated in a two-step statistical analysis that included Holm's pairwise [Formula: see text] test. The discrimination error rate of a set of parameters was evaluated by the Mahalanobis distance.;RESULTS:Ex vivo testing in porcine breast revealed significant differences in the nonlinear viscoelastic parameters among combinations of three tissue types. The discrimination error rate was low among all tested combinations of three tissue types.;CONCLUSION:Although tissue discrimination was not achieved using only a single nonlinear viscoelastic parameter, a set of four nonlinear viscoelastic parameters were able to reliably and accurately discriminate fat, breast fibroglandular tissue and muscle.

Evaluation of industrial machine design improvement ideas using characteristic-based hierarchical optimisation strategies

Yoshimura, Masataka;Hasuike, Masaki;Miyashita, Tomoyuki;Yamakawa, Hiroshi

JOURNAL OF ENGINEERING DESIGN24(11)p.794 - 8132013年09月-2013年

DOI

詳細

ISSN:0954-4828

肝がんラジオ波焼灼療法における組織凝固領域提示システムの開発(肝臓組織の粘弾性の温度依存性のモデル化)

呂 筱薇;築根 まり子;渡辺 広樹;小林 洋;宮下 朋之;藤江 正克

日本機械学会論文集 C編79(807)p.4381 - 43882013年09月-2013年

CiNii

詳細

ISSN:0387-5024

概要:Recently radio frequency ablation (RFA) has been increasingly important in treating liver cancers. RFA is ordinarily conducted using elastographic imaging to monitor the ablation procedure and the temperature of the electrode needle is displayed on the radiofrequency generator. However, the coagulation boundary of liver tissue in RFA is unclear and unconfident. This can lead to both excessive and insufficient RFA thereby diminishing the advantages of the procedure. In the present study, we developed a method for determining the coagulation boundary of liver tissue in liver RFA. To investigate this boundary we used the mechanical characteristics of biochemical components as an indicator of coagulation to produce a relational model for viscoelasticity and temperature. This paper presents the data acquisition procedures for the viscoelasticity characteristics and the results of relationship model of viscoelasticity's temperature dependence. We employed a rheometer to measure the viscoelastic characteristics of porcine liver tissue. To determine relationship model between temperature and viscoelasticity, we used a least-square method and the minimum root mean square error was calculated to optimize the model functional relations. The functional relation between temperature and viscoelasticity was divided into linear and non-linear in different temperature regions. The boundary between linear and non-linear functional relation was 58.0°C.

A method for deriving the coagulation boundary of liver tissue using a relational model of viscoelasticity and temperature in radio frequency ablation.

Lu Xiaowei;Tsukune Mariko;Watanabe Hiroki;Yamazaki Nozomu;Isobe Yosuke;Kobayashi Yo;Miyashita Tomoyuki;Fujie Masakatsu G

A method for deriving the coagulation boundary of liver tissue using a relational model of viscoelasticity and temperature in radio frequency ablation.20122012年09月-2012年

DOI

詳細

ISSN:1557-170X

概要::Recently radiofrequency (RF) ablation has become increasingly important in treating liver cancers. RF ablation is ordinarily conducted using elastographic imaging to monitor the ablation procedure and the temperature of the electrode needle is displayed on the RF generator. However, the coagulation boundary of liver tissue in RF ablation is unclear and unconfident. This can lead to both excessive and insufficient RF ablation thereby diminishing the advantages of the procedure. In the present study, we developed a method for determining the coagulation boundary of liver tissue in RF ablation. To investigate this boundary we used the mechanical characteristics of biochemical components as an indicator of coagulation to produce a relational model for viscoelasticity and temperature. This paper presents the data acquisition procedures for the viscoelasticity characteristics and the analytical method used for the coagulation model. We employed a rheometer to measure the viscoelastic characteristics of liver tissue. To determine the model functional relationship between viscoelasticity and temperature, we used a least-square method and the minimum root mean square error was calculated to optimize the model functional relations. The functional relation between temperature and viscoelasticity was linear and non-linear in different temperature regions. The boundary between linear and non-linear functional relation was 58.0°C.

A study on estimation of the deformation behavior in the collapse process of lung.

Katsuyama Yusuke;Yamazaki Nozomu;Kobayashi Yo;Hoshi Takeharu;Miyashita Tomoyuki

A study on estimation of the deformation behavior in the collapse process of lung.20122012年09月-2012年

DOI

詳細

ISSN:1557-170X

概要::In this paper, finite element methodology was applied to predict the deformation of tissue during lung collapse using pre-operative information. Accurate prediction of lung collapse deformation prior to surgical intervention can provide valuable diagnostic information to clinical staff, allowing a better understanding of the movement of the target segment. This paper describe the methodology to derive the deformed shape of finite element model that satisfy the equilibrium condition using 3-D model developed from the image measured by a multi-slice CT imaging device. The movement of the target segment can be predicted by the finite element model. Previous research studies applied the distributed load on the surface of the lung structure as loading conditions. Here we have suggested a method that considers the deformation of alveoli contraction and elongation while breathing. Specifically, by introducing the governing equations of a reduction in volume strain into the governing equations of the finite element method, lung structure is analyzed. Lung deformation obtained from the analysis was compared with experimental results and compared with the proposed method. The proposed method showed an improvement of deformation-prediction accuracy as 0.58%. We confirmed the qualitative similarities between the deformation of the analysis and the experiment, thus demonstrating the effectiveness of the proposed method.

Development of a temperature distribution simulator for lung RFA based on air dependence of thermal and electrical properties.

Yamazaki Nozomu;Watanabe Hiroki;Lu XiaoWei;Isobe Yosuke;Kobayashi Yo;Miyashita Tomoyuki;Fujie Masakatsu G

Development of a temperature distribution simulator for lung RFA based on air dependence of thermal and electrical properties.20122012年09月-2012年

DOI

詳細

ISSN:1557-170X

概要::Radio frequency ablation (RFA) for lung cancer has increasingly been used over the past few years, because it is a minimally invasive treatment. As a feature of RFA for lung cancer, lung contains air. Air is low thermal and electrical conductivity. Therefore, RFA for this cancer has the advantage that only the cancer is coagulated, because the heated area is confined to the immediate vicinity of the heating point. However, it is difficult for operators to control the precise formation of coagulation zones due to inadequate imaging modalities. We propose a method using finite element method to analyze the temperature distribution of the organ in order to overcome the current deficiencies. Creating an accurate thermal physical model was a challenging problem because of the complexities of the thermal properties of the organ. In this study, we developed a temperature distribution simulator for lung RFA using thermal and electrical properties that were based on the lung's internal air dependence. In addition, we validated the constructed simulator in an in vitro study, and the lung's internal heat transfer during RFA was validated quantitatively.

Validation of accuracy of liver model with temperature-dependent thermal conductivity by comparing the simulation and in vitro RF ablation experiment.

Watanabe Hiroki;Yamazaki Nozomu;Isobe Yosuke;Lu XiaoWei;Kobayashi Yo;Miyashita Tomoyuki;Ohdaira Takeshi;Hashizume Makoto;Fujie Masakatsu G

Validation of accuracy of liver model with temperature-dependent thermal conductivity by comparing the simulation and in vitro RF ablation experiment.20122012年09月-2012年

DOI

詳細

ISSN:1557-170X

概要::Radiofrequency (RF) ablation is increasingly used to treat cancer because it is minimally invasive. However, it is difficult for operators to control precisely the formation of coagulation zones because of the inadequacies of imaging modalities. To overcome this limitation, we previously proposed a model-based robotic ablation system that can create the required size and shape of coagulation zone based on the dimensions of the tumor. At the heart of such a robotic system is a precise temperature distribution simulator for RF ablation. In this article, we evaluated the simulation accuracy of two numerical simulation liver models, one using a constant thermal conductivity value and the other using temperature-dependent thermal conductivity values, compared with temperatures obtained using in vitro experiments. The liver model that reflected the temperature dependence of thermal conductivity did not result in a large increase of simulation accuracy compared with the temperature-independent model in the temperature range achieved during clinical RF ablation.

Development and evaluation of an identification method for the biomechanical parameters using robotic force measurements, medical images, and FEA.

Hoshi Takeharu;Tsukune Mariko;Kobayashi Yo;Miyashita Tomoyuki;Fujie Masakatsu G

Development and evaluation of an identification method for the biomechanical parameters using robotic force measurements, medical images, and FEA.20112011年09月-2011年

DOI

詳細

ISSN:1557-170X

概要::This paper presents a new identification method for the biomechanical parameters of human tissues for the purpose of improving the accuracy of dynamic organ simulation. We describe the formulation of the method, and also design a robotic system to implement the method using a robotic probe, a medical imaging device, and a numerical simulator for the finite element analysis (FEA). We carried out an experiment using an experimental system and a tissue phantom to verify the effectiveness of the method. The results of this experiment show that the Young's modulus of the tissue phantom can be estimated with the experimental system. We also compared the estimated values of the Young's moduli with the measured values from a rheometer. These results confirm that the identification method and the system design, proposed and developed in this work, are effective for accurately simulating organ behavior.

Modeling the internal pressure dependence of thermal conductivity and in vitro temperature measurement for lung RFA.

Yamazaki Nozomu;Watanabe Hiroki;Seki Masatoshi;Hoshi Takeharu;Kobayashi Yo;Miyashita Tomoyuki;Fujie Masakatsu G

Modeling the internal pressure dependence of thermal conductivity and in vitro temperature measurement for lung RFA.20112011年09月-2011年

DOI

詳細

ISSN:1557-170X

概要::Radio frequency ablation (RFA) for lung cancer has increasingly been used over the past few years because RFA is minimally invasive treatment for patients. As a feature of RFA for the lung cancer, lung has the air having low thermal conductivity. Therefore, RFA for lung has the advantage that only the tumor is coagulated because heating area is confined to the immediate vicinity of the heating point. However, it is difficult for operators to control the precise formation of coagulation zones due to inadequate imaging modalities. We propose a method using numerical simulation to analyze the temperature distribution of the organ in order to overcome the current deficiencies. Creating an accurate thermophysical model was a challenging problem because of the complexities of the thermophysical properties of the organ. In this work, as the processes in the development of ablation simulator, measurement of the pressure dependence of lung thermal conductivity and in vitro estimation of the temperature distribution during RFA is presented.

Palpation nonlinear reaction force analysis for characterization of breast tissues.

Kobayashi Yo;Tsukune Mariko;Hoshi Takeharu;Miyashita Tomoyuki;Shiraishi Yasuyuki;Yambe Tomoyuki;Fujie Masakatsu G

Palpation nonlinear reaction force analysis for characterization of breast tissues.20112011年09月-2011年

DOI

詳細

ISSN:1557-170X

概要::This paper addresses a diagnostic palpation system based on the measurement of nonlinear elasticity. An indentation probe is used to press against breast tissue. Then, the measured reaction force is used to estimate the parameters of nonlinear elasticity, which enables the identification of tissue type, such as fat, muscle, mammary gland or tumor. Here, we present the basic concept of our study and preliminary experimental and simulation results from pilot studies. More specifically, we measured the nonlinear response of reaction force using the breast of a goat. In addition, we also simulated the reaction force using nonlinear biomechanical simulation with several tissue types. Large differences in reaction force occur only in the nonlinear range in both experimental and simulation situations. Our results confirmed the feasibility of our concept.

Evaluation and comparison of the nonlinear elastic properties of the soft tissues of the breast.

Tsukune Mariko;Kobayashi Yo;Hoshi Takeharu;Miyashita Tomoyuki;Fujie Masakatsu G

Evaluation and comparison of the nonlinear elastic properties of the soft tissues of the breast.20112011年09月-2011年

DOI

詳細

ISSN:1557-170X

概要::As the number of breast cancer patients increases, there is an increasing need for accurate non-invasive methods for the diagnosis of breast cancer. It is possible that the nonlinear elastic properties of soft tissues of the breast can be used as a basis for diagnostic methods. Therefore, we have proposed a robotic palpation system for diagnosis based on the nonlinear elastic properties of tissue. Here, we measured the nonlinear elastic properties of soft tissues of the breast using creep tests and three parameters of the nonlinear elastic model were acquired. Two of these parameters are significantly different among soft tissues of the breast and that the magnitude of these parameters was determined by the tissue structure. These parameters could be used to differentiate between tissue types and aid in the diagnosis of breast cancer.

Estimation of intraoperative blood flow during liver RF ablation using a finite element method-based biomechanical simulation.

Watanabe Hiroki;Yamazaki Nozomu;Kobayashi Yo;Miyashita Tomoyuki;Ohdaira Takeshi;Hashizume Makoto;Fujie Masakatsu G

Estimation of intraoperative blood flow during liver RF ablation using a finite element method-based biomechanical simulation.20112011年09月-2011年

DOI

詳細

ISSN:1557-170X

概要::Radiofrequency ablation is increasingly being used for liver cancer because it is a minimally invasive treatment method. However, it is difficult for the operators to precisely control the formation of coagulation zones because of the cooling effect of capillary vessels. To overcome this limitation, we have proposed a model-based robotic ablation system using a real-time numerical simulation to analyze temperature distributions in the target organ. This robot can determine the adequate amount of electric power supplied to the organ based on real-time temperature information reflecting the cooling effect provided by the simulator. The objective of this study was to develop a method to estimate the intraoperative rate of blood flow in the target organ to determine temperature distribution. In this paper, we propose a simulation-based method to estimate the rate of blood flow. We also performed an in vitro study to validate the proposed method by estimating the rate of blood flow in a hog liver. The experimental results revealed that the proposed method can be used to estimate the rate of blood flow in an organ.

Temperature dependence of thermal conductivity of liver based on various experiments and a numerical simulation for RF ablation.

Watanabe Hiroki;Yamazaki Nozomu;Kobayashi Yo;Miyashita Tomoyuki;Hashizume Makoto;Fujie Masakatsu G

Temperature dependence of thermal conductivity of liver based on various experiments and a numerical simulation for RF ablation.20102010年09月-2010年

DOI

詳細

ISSN:1557-170X

概要::Radiofrequency ablation (RFA) for liver cancer has increasingly been used over the past few years because RFA is minimally invasive treatment for patients. However, precise control of the formation of coagulation zones is difficult for operators due to inadequate imaging modalities. With this in mind, we have proposed a model-based robotic ablation system using numerical simulation to analyze temperature distributions in the organ to overcome this deficiency. The objective of our work is to develop a temperature-dependent thermophysical organ model to construct a precise numerical simulator for RFA. However, no standard methods exist for obtaining the thermophysical properties of biological tissues, as detailed evaluations of the accuracy of properties obtained from various experiments have not been completed. The purpose of this study was thus to measure and model the temperature dependence of thermal conductivity in hog liver from three representative methods, and to compare these results using our developed numerical simulator to reveal differences in temperature distributions stemming from differences in thermal conductivities.

A Development of Collaborative Design System using Data Envelopment Analysis

JSPE Precision Engineering Conference (Spring) / JSPEProc. of JSPE Conf. (CD-ROM)2003年03月-

A Study on Collaborative Design Considering Features of Design

Miyashita, Tomoyuki; Yamakawa, Hiroshi

米国機械学会CD-ROM of DETC DAC34051p.155 - 1592002年10月-2002年12月 

Scopus

詳細

概要:In design processes of machinery, much computer software, for examples CAD/CAE/CAM software, are used. The design processes are aided by this software. The seamless connections of the design processes are necessary for the improvement of the cost benefit of the products. However, sometimes, the conflicts among designs or design processes are occurred by the change of the design at a certain design process and these conflicts are should be noticed and solved immediately. In this research, we have developed the design system including CAD software and the developed system has some functions to find the conflicts of the change of designs and to solve the conflicts. We use Data Envelopment Analysis (DEA) to calculate the efficiency of the design and Satisficing Trade-off Method (STM) to find and solve the conflicts. We have confirmed through some fundamental numerical examples and discussed of the proposed system and method and showed the effectiveness of out study.

A Study on Collaborative Design Considering Features of Design

Proc. of ASME 2002 Int. Design Eng. Tech. Conf. and the Comp. and Information in Eng. Conf.CD-ROM of DETC DAC340512002年10月-

免疫システムによる設計最適化に関する研究

日本機械学会機構論No.02-012002年09月-

多様性を考慮したジョブショップスケジューリングの決定

日本精密工学会秋季大会講演論文集2002年09月-

金型粗加工のための逆オフセット面に基づく工具経路の生成手法

日本精密工学会秋季大会講演論文集2002年09月-

A Study on Gradient Based Search Agents in Global Optimization

米国航空宇宙学会CD-ROM of MAO, AIAA2002-55082002年09月-

A Study on Structural Optimization using Immune System

JSME Mechanical Engineering Congress /JSMENo.02-012002年09月-

A Discussion on Job-shop Scheduling Problem considering Environment Properties

JSPE Precision Engineering Conference (Autumn) / JSPEProc. of JSPE Conf. (CD-ROM)2002年09月-

A Generation method for tool path using Inverse Offset Plane

JSPE Precision Engineering Conference (Autumn) / JSPEProc. of JSPE Conf. (CD-ROM)2002年09月-

A Study on Gradient Based Search Agents in Global Optimization

Proc. of 10th Symposium on Multidisciplinary Analysis and Opt./AIAACD-ROM of MAO, AIAA2002-55082002年09月-

A Study on the Collaborative Design using Supervisor System

Miyashita Tomoyuki;Yamakawa Hiroshi

日本機械学会JSME Int. J. Series C(1)p.333 - 3412002年03月-2002年03月 

CiNii

詳細

ISSN:13447653

概要:In recent years, financial difficulties led engineers to look for not only the efficiency of the function of a product but also the cost of its development. In order to reduce the time for the development, engineers in each disciplinary have to develop and improve their objectives collaboratively. Sometimes, they have to cooperate with those who have no knowledge at all for their own disciplinary. Collaborative designs have been studied to solve these kinds of the problems, but most of them need some sorts of negotiation between disciplines and assumed that the negotiation will be done successfully. However, in the most cases of real designs, manager of each disciplinary does not want to give up his or her own objectives to stress on the other objectives. In order to carry out these negotiation smoothly, we need some sort of evaluation criteria which will show efficiency of the product considering the designs made up by each division and if possible, considering the products of the competitive company. In this study, we use Data Envelopment Analysis (DEA) to calculate the efficiency of the design and showed every decision maker the directions of the development of the design. We newly called these kinds of systems as supervisor systems and implemented these systems in computer networks that every decision makers can use conveniently. Through simple numerical examples, we showed the effectiveness of the proposed method.

A Study on the Collaborative Design using Supervisor System

Trans of JSME Series C/JSMEJSME Int. J. Series C2002年03月-

探索エージェントによる最適設計に関する研究

日本機械学会機論(C) No. 67-6622001年10月-

A Study on the Optimum Design Using Search Agents

Trans of JSME Series C/JSME67-662C2001年10月-

Optimum Design Using Search Agents

Proc. of ASME 2001 Int. Design Eng. Tech. Conf. and the Comp. and Information in Eng. Conf.Paper No. DAC145322001年09月-

Optimum Design Using Search Agents

Proc. of ASME 2001 Int. DETC and CIE/ASME (DAC14532) 2001年09月-

免疫エージェントによる最適設計に関する研究

日本機械学会No.01-012001年08月-

A Study on Structural Optimization using Immune System

JSME Engineering Congress/JSMENo.01-01 (??)2001年08月-

データ包絡分析法と設計者の交渉過程を考慮した協調設計システムの開発とその検討

土木学会2001年07月-

探索エージェントによる多点同時探索戦略による最適設計に関する研究

日本計算工学会日本計算工学会講演論文集 2001年05月-

「多目的最適化設計・満足化設計」

日本計算工学会研究分科会活動報告書2001年05月-

Report of Design Optimization and Satisfaction Research Commitee

Report of JSCES/JSCES(??)2001年05月-

A Study on Optimum Design using Search Agents

Proc. of JSCES Conf./JSCES(??)2001年05月-

協調設計システムの検討−複合領域問題の検討−

日本機械工学会機構論 No.00-34, 172-1752001年03月-

An Examination on Collaborative Design System

Proc. of Design Eng. and System Conf./JSMENo.00-34 (172-175)2001年01月-

ネットワークを利用した協調的最適設計システムの構築及び検討

日本機械学会最適化シンポジウム講演論文集 205-2102000年10月-

An Examination and A Development of the Collaborative Optimization System on Computer Network

Proc. of System Optimization Symposium(205-210)2000年10月-

An Examination on the Supervisor System in the Multidisciplinary Design Optimization under Conflict Objectives

Proc. of 8th Symposium on Multidisciplinary Analysis and Opt.Paper No. AIAA2000-47242000年09月-

A Study on the Collaborative Design Using Trade-off Satisficing Method

Proc. of ASME 2000 Int. Design Eng. Tech. Conf. and the Comp. and Information in Eng. Conf.Paper No. DAC210112000年09月-

A Study on the Collaborative Design Using Trade-off Satisficing Method

Proc. of ASME 2000 Int. DETC and CIE /ASME(DAC21011)2000年09月-

An Examination on the Supervisor System in the Multidisciplinary Design Optimization under Conflict Objectives

Proc. of 8th Symposium on Multidisciplinary Analysis and Opt./AIAA(AIAA2000-4724)2000年09月-

免疫エージェントによる最適設計に関する研究

日本機械学会機講論 No.00-01,151-1522000年08月-

An Examination on Structural Optimization using Immute Agents

JSME Mechanical Engineering Congress/JSME(151-152)2000年08月-

Collaborative Optimization in Structural Design using Trade-Off Satisficing Method

Abstract of 15th MCDM Conf.2000年07月-

Collaborative Optimization in Structural Design using Trade-Off Satisficing Method

Proc. of MCDM/MCDM(104)2000年07月-

スーパバイズシステムを用いた協調設計に関する研究

日本機械学会 論文集/日本機械学会66-643C2000年03月-

スーパバイズシステムによる多目的最適化に関する研究

情報処理学会 MPSシンポジウム 講演論文集/情報処理学会No.99-272000年03月-

A Study on Multi-Objective Optimization using Supervise System

MPS Symposium/IPSJ(165-172)2000年03月-

A Study on the Collaborative Design using Supervisor System

Trans. of JSME Series C/JSME66-643C (921-928)2000年03月-

マルチエージェントによる最適設計に関する研究

日本機械学会 論文集/日本機械学会65-641C1999年12月-

A Study on the Optimum Design Applying Multi-Agents architecture

Trans of JSME Series C/JSME65-641C (4589-4596)1999年12月-

Function of Gene in Adaptive Range Genetic Algorithms

第1回 構造最適化に関するシンポジウム論文集/日本機械学会他Vol.11999年11月-

A Study on the Collaborative Optimization using a Supervisor System

第1回 構造最適化に関するシンポジウム論文集/日本機械学会他Vol.11999年11月-

スーパバイズエージェントによる協調設計に関する研究

日本機械学会 講演論文集/日本機械学会No.99-271999年11月-

複合領域設計システムの構築と検討

日本機械学会 講演論文集/日本機械学会No.99-271999年11月-

An Examination and Development of Multidisciplinary Design System

Proc. of Design Eng. and System Conf./JSMENo.99-27(142-145)1999年11月-

A Study on the Collaborative Design using Supervise Agents

Proc. of Design Eng. and System Conf./JSMENo.99-27(134-137)1999年11月-

A Study on the Collaborative Optimization Using a Supervisor System

Proc. of CJK-OSM1/JSME,KSME(501-508)1999年11月-

Function of Gene in Adaptive Range Genetic Algorithms

Proc. of CJK-OSM1/JSME,KSME(141-148)1999年11月-

多点同時探索戦略を用いた検索エージェントによる最適設計に関する研究

日本機械学会 講演論文集/日本機械学会No.99-11999年07月-

複合領域最適化における設計支援システムに関する検討

設計シンポジウム99講演論文集/設計工学会他1999年07月-

An Examination on the Multidisciplinary Design Optimization System

Proc. of Design Symp./JSME(69-76)1999年07月-

An Examination on the Optimum Design by Search Agents With Multi-Start Search Strategy

JSME Mechanical Engineering Congress /JSMENo.00-01 (555-556)1999年07月-

A Study on the Optimum Design Applying Multi-Agent architecture

Proc. of World Congress of Struct. and Multidisciplinary Opt./ISSMOVol.11999年05月-

A Study on the Optimum Design Applying Multi-Agent architecture

Proc. of World Congress of Struct. and Multidisciplinary Opt./ISSMO Vol.1 (578-580 and CD-ROM)1999年05月-

数式処理システムを用いた最適設計に関する研究

宮下朋之, 山川宏

日本機械学会 論文集C編57-541Cp.2959 - 29641991年03月-

探索エージェントによる多点同時探索戦略を用いた最適設計法に関する研究

宮下 朋之;山川 宏

計算工学講演会論文集6(2)p.699 - 7022001年05月-2001年05月 

CiNii

詳細

ISSN:1342145X

数式処理システムを用いた最適設計に関する研究

宮下 朋之;山川 宏

日本機械学會論文集. C編57(541)p.2959 - 29641991年09月-1991年09月 

CiNii

詳細

ISSN:03875024

概要:In conventional optimum design process, symbolic formulation of mathematical optimization problem usually must be done by the designers before numerical computation. And these pre-process tasks are sometimes tremendously hard and time consuming for the designers. In this paper, we will show a simplification of these pre-process tasks with an aid of symbolic manjpulation systems which have been studied in the field of Artificial Intelligence. In almost existent symbolic manipulation systems, their main purposes being stressed on verifying the expression, the computer programs in the systems could not obtain any information directly from the operator during the excuting of the program. In this study, to reduce this disadvantage we use menu system as interactive computer system to define and decide the objective function and constraints freely. And, we applied a symbolic manupulation system to a formulation of the objective function and the constraints as well as to structural analysis by Energy method. Consideration have been given to the obtained optimum designs and the effectiveness was confirmed.

3116 小型人工衛星の構造最適化に関する研究

齊藤 圭佑;宮下 朋之;角田 博明;渡辺 和樹

設計工学・システム部門講演会講演論文集2008(18)p.441 - 4462008年09月-2008年09月 

CiNii

詳細

ISSN:13480286

概要:Recently the development of the small satellite becomes active. In general, small satellites are expected to be developed faster and cheaper than the large satellites. The launching cost of the piggyback satellite is low, and then a cost of a piggyback satellite is often decided by weight. Therefore it is important to reduce the weight of satellite for cost. Considering the severe mechanical environment of launching, we have to design of satellite structure. The natural frequency of the satellite should be higher than the value decided by the rocket and the satellite should withstand the loads during launch. In this paper, we will propose the design of the satellite whose dimension is 20 centimeters cube. The satellite supposed to be launched by H-2A rocked and we focused on the trade-off design between minimization of mass and maximization of natural frequency under the maximum stress condition for optimizing the satellite structures.

1111 ニューラルネットワークを用いた概念設計支援に関する基礎的検討

佐藤 大祐;宮下 朋之

設計工学・システム部門講演会講演論文集2008(18)p.77 - 822008年09月-2008年09月 

CiNii

詳細

ISSN:13480286

概要:In conceptual design phase, if designers are much more conscious of design objectives, they won't come up with various ideas about new product. On the other hand, using brainstorming allow to get various ideas, but to get a lot of unavailable ideas together. In this study, we propose the method that supports generating various and effective ideas in conceptual design. In the last our study, we have proposed conceptual design support method using Data Envelopment Analysis. The last method's approach is using several evaluation values to fill the gap of palate frontier. But it was too difficult for subjects to use this approach in the experiment. Proposed method in this paper supplies key words. These key words are made of calculated component values using made nonlinear mathematical model of relation between component and evaluation of idea with Neural Network. We confirm that the method is useful in terms of simplicity of generating various and effective ideas.

穿刺手術のための生体力学モデルの開発

山川 宏;モハマド カマロル;中村 拓真;川村 和也;小林 洋;岡本 淳;宮下 朋之;藤江 正克

Journal of Japan Society of Computer Aided Surgery : J.JSCAS8(3)p.140 - 1412006年12月-2006年12月 

CiNii

詳細

ISSN:13449486

探索エージェントによる最適設計に関する研究

宮下 朋之;山川 宏

日本機械学會論文集. C編67(662)p.3227 - 32352001年10月-2001年10月 

CiNii

詳細

ISSN:03875024

概要:Many optimization methods and practical softwares have been developing for many years and most of them are very effective, especially to solve practical problems. But, non linearity of objective functions and constraint functions, which have frequently seen in practical problems, has caused a difficult situation for optimization. This difficulty mainly lies in the existence of several local optimum solutions. In this study, we have proposed a new global optimization methodology that provides an information exchange mechanism in the nearest neighbour method. We have developed a simple software system, which treated each design point in optimization as an agent. Many agents can search the optima simultaneously exchanging the their information. We have defined two roles of the agents. Local search agents have roles on searching local optima by an existing method like the steepest decent method and so on. Stochastic search agents investigate the design space by making use of the information from other agents. Through simple and several structural optimization problems, we have confirmed the advantages of this method.

Method for estimating the temperature distribution associated with the vessel cooling effect in radio frequency ablation

Lu, Xiaowei; Kikuchi, Hayato; Hirooka, Kazumasa; Isobe, Yosuke; Watanabe, Hiroki; Kobayashi, Yo; Miyashita, Tomoyuki; Fujie, Masakatsu G.

Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS2015-Novemberp.4836 - 48392015年11月-2015年11月 

DOIScopus

詳細

ISSN:1557170X

概要:© 2015 IEEE.Recently, radio frequency ablation (RFA) has become one of the most popular thermal treatments for liver cancer. RFA is minimally invasive and effective in inducing tumor coagulation, however, because use the procedure depends on the experience of the physician, consistent accuracy cannot be guaranteed. In particular, when the tumor is close to a large vessel, a suboptimal ablation margin can result in tumor recurrence. To improve the accuracy of RFA treatment, we have developed an RFA supporting system, which was constructed by using finite element method and operated by means of a model-based control method. In this study, we focused on the cooling effect of flow volume inside a large vessel during RFA, and analyzed heat transfer between the large vessel and liver tissue using a model. We derived the heat transfer parameter (the Nusselt number (Nu)) between the large vessel and liver tissue during RFA by using a finite-element method (FEM). When the Nu for FEM analysis had a value of 3, the FEM analysis model was representative of the actual ablation objective, and the maximum error between FEM analysis and the measurement results was within 2.0[°C]. Thus, it was suggested that the Nu was effective for FEM analysis regarding heat transfer between a large vessel and tissue. However, according to the differences between the results of FEM analysis and measurements concerning the three livers, the heat transfer volume was determined by the Nu, which is different individually in common with other thermal properties. In conclusion, it is necessary to consider the individual differences in the heat transfer volume parameter for FEM analysis.

Membrane space structure with sterical support of booms and cables

Torisaka, Ayako; Torisaka, Ayako; Satoh, Yoshitaka; Satoh, Yoshitaka; Akita, Takeshi; Akita, Takeshi; Natori, M. C.; Natori, M. C.; Yamakawa, Hiroshi; Yamakawa, Hiroshi; Miyashita, Tomoyuki; Miyashita, Tomoyuki

3rd AIAA Spacecraft Structures Conference2016年01月-2016年01月 

Scopus

詳細

概要:© 2016, American Institute of Aeronautics and Astronautics Inc, AIAA. All rights reserved.Authors suggested a new structure combined with lightweight membranes and booms using convex tape considering its application as a space structure.. The larger membrane is preferred to get a solar effect from sails and power generation needs. In the past researches, we assumed a square shaped flat structure and studied the use of cables, positions of cables connecting between boom and membrane. In this paper, an additional studies about a steric membrane structure with booms and cables has been carried out to confirm a structural properties. We manufactured experiment model for verifying these properties, and also we confirmed about the same kinds of properties of hexagonal structure.

エージェントアプローチによる構造最適化・満足化に関する研究

宮下 朋之;山川 宏

日本機械学會論文集. C編65(640)p.4589 - 45961999年12月-1999年12月 

CiNii

詳細

ISSN:03875024

概要:In recent years, multi-agent architectures which have been studied in the field of artificial intelligence might attract a great deal of attention to the ability of the cooperative properties for engineering. In this study, we proposed a new approach to find the improved design in the layout design and shape design problems of framed structures by applying the multi-agent architectures. We considered each agent as an element in Finite Element Analysis and proposed modification rules for the layout shape of the structure. Following this approach, each agent proposes modification plans based on his or her evaluate function. The proposed plans are picked up or rejected by communication among agents and the remained plans may improve a design created from an initially simple structure. We developed the simulation system running on the UNIX and considerations have been given to the simple truss structural design and some advantages of the proposed have been shown and confirmed.

2110 協調設計システムの検討 : 複合領域問題の検討

宮下 朋之;山川 宏

設計工学・システム部門講演会講演論文集2001(10)p.172 - 1752001年01月-2001年01月 

CiNii

詳細

ISSN:13480286

概要:Recent years, computational power has been incresing and designers could discuss design problems from several points of view. In these discussions, simulations using computers could offer useful information to evaluate their designs to develop profitable products exceeding the competitor's product. Optimization methods offer reasonable design canditates. However, in the design in which some technical fields are included, it is difficult to make decision to settle design canditates. In our previous study, we have proposed the method that led designers to collaboration and developed the software system. In this paper, we have examined the developed system through the some design problems.

119 ネットワークを利用した協調的最適設計システムの構築及び検討 : 満足化トレードオフ法の適用

宮下 朋之;山川 宏

最適化シンポジウム講演論文集2000(4)p.205 - 2102000年10月-2000年10月 

CiNii

詳細

概要:Recent years, financial difficulties led engineers to look for not only the efficiency of the function of a product but also the cost of its development. In order to reduce the time for the development, engineers in each discipline have to develop and improve their objectives collaboratively. Sometimes, they have to cooperate with those who have no knowledge at all for their own disciplines. Collaborative designs have been studied to solve these negotiations will be done successfully. However, in the most cases of real designs, manager of each discipline does not want to give up his or her own objectives to stress on the other objectives. In order to carry out these negotiations smoothly, we need some sort of evaluation criteria which will show efficiency of the product considering the designs by each division and if possible, considering the products of the competitive company, too. In this study, we use data Envelopment Analysis (DEA) to calculate the efficiency of the design and showed every decision maker the directions of the development of the design. We will call here these kinds of systems as supervisor systems and implemented these systems in computer networks that every decision maker can use conveniently. Through simple numerical examples, we showed the effectiveness of the proposed method.

520 免疫エージェントによる最適設計に関する検討 : 抗原-抗体反応の検討

宮下 朋之;坪田 有玄;山川 宏

年次大会講演論文集 : JSME annual meeting2000(1)p.151 - 1522000年07月-2000年07月 

CiNii

詳細

概要:We, human being, have survived and prosperd in a biological systems and an immute system plays a significant roll in protecting us against foregin bacillus. From the results of the study field in information processing, it is pointed out that the immute system is capable of learning, memory, pattern recognition and optimization using genetic operators. In the optimization of mechanical and structural designs, an environment of products is significant factor to decide the design. In this study, we will treate the design variables in the optimization problem as antibody and the environment as the antigen. We treated simple numerical examples and they resulted the design stored in memory-cell with best evaluation and worst evaluation considering environment. We have confirmed that the design canditates including the design obtained by mathematical programming are found among the results.

2553 免疫システムによる設計最適化に関する研究

宮下 朋之;山川 宏;乾 正知

年次大会講演論文集 : JSME annual meeting2002(7)p.193 - 1942002年09月-2002年09月 

CiNii

詳細

概要:Optimization techniques are useful to determine the unknown parameter according to the evaluations of design. This techniques require to be formulated mathematically. Then the indexes that is difficult to express mathematically, for examples "kansei" are difficult to be included in the optimization problems. In this study, we will propose the algorism based on immune algorithms and try to derive some candidates including solution. immune algorithms are considered as the optimization algorithms. However, the immune algorithms are not fully established becase various algorithms are considered and fully investigated. In this study, from above point of view, we will propose the immune algorithm that treates the "antibody-antigen reaction". Through some numerical examples, we will show the effectivenews of th proposed algorithm.

K-0215 免疫システムによる構造最適化に関する研究(J02-4 ALife他)(J02 設計・解析と最適化・適応化)

宮下 朋之;坪田 有玄;山川 宏

年次大会講演論文集 : JSME annual meeting0(1)p.53 - 542001年08月-2001年08月 

CiNii

詳細

概要:Immune system in mammals plays a significant role on the survival in the case with attacking of various bacteria. This system seems to equip the mechanism eliminate the various vacteria. From the view point of information mechanism, this system could offer the designs that are considered with the environmental situation, for example, wind loads, deterioration and so on. Especially, immune algorithms are considered as the optimization algorithms. However, the immune algorithms are not fully established becase various algorithms are considered and fully investigated. In this study, from above point of view, we will propose the immune algorithm that treates the "antibody-antigen reaction". Through some numerical examples, we will show the effectivenews of th proposed algorithm.

包絡分析法に基づくコラボレーション設計支援(機械要素,潤滑,工作,生産管理など)

小林 正和;宮下 朋之;山川 宏;吉村 允孝

日本機械学會論文集. C編74(738)p.459 - 4662008年02月-2008年02月 

CiNii

詳細

ISSN:03875024

概要:This paper focuses on the creative aspects of collaboration and proposes a method for analyzing created ideas to help designers to enhance designers' creativity during collaborative design projects. The proposed method is based on DEA (Data Envelopment Analysis), analyses ideas created by designers to reveal characteristics and overall effectiveness of each idea, interrelationship between ideas and potentially fruitful directions for improvement of created ideas and exploration of new ideas and aims to help designers explore more sophisticated ideas. To enable smooth collaboration when using the proposed analysis method, this paper also proposes a computerized support system. This system is based on a combination of the analysis method proposed here, and the method for visualizing interactive communication processes proposed in our previous work. Analyzing system analyzes created ideas and visualizes the results from the multiple viewpoints, whereas visualizing system records interactive communication processes among designers and visualizes them in an easyto-understand way.

3201 部分硬化型インフレータブル構造の最適設計(J06-1 スマート構造,J06 知的材料・構造システム)

佐藤 暢晃;岩越 智之;角田 博明;山川 宏;宮下 朋之

年次大会講演論文集 : JSME annual meeting2006(6)p.111 - 1122006年09月-2006年09月 

CiNii

詳細

概要:In this study, we proposed partially rigidizable inflatable structures consist of rigidizable layers on the part where to be stiffened. As a result of tension test of the test specimen, we could make the property of the material clear. Furthermore, we made a initial model that wholly covered hemisphere structural model and the topology optimization was applied to find the optimum arrangement of regidizable layers. As a result, the number of edge reduced to 35 lines, and considering the volume to 11% lower than that of the basic model. From the point of view of manufacturing, stiffness and stress concentration, we could suppose that the basic model is suitable for our required.

117 アイデアの評価・分析に基づく創造的コラボレーション支援(創造・創発〔II〕)

小林 正和;宮下 朋之;山川 宏;吉村 允孝

Designシンポジウム講演論文集2006p.105 - 1082006年07月-2006年07月 

CiNii

詳細

概要:This paper focuses on the creative aspects of collaboration and proposes a method for analyzing created ideas to support collaborative design processes. The proposed method, based on DEA (Data Envelopment Analysis), analyses created ideas, reveals their characteristics and interrelationships, clarifies potential directions for improvement of created ideas as well as potentially fruitful directions for exploration of new ideas, and aims to help designers explore more sophisticated products. To enable smooth collaboration when using the proposed method, a computerized support system is constructed. This system is based on a combination of the analysis method proposed here, and the method for visualizing interactive communication processes proposed in our previous work.

2306 鉄道車両衝突時の乗客の安全性に関する研究(OS5-2 設計と最適化II)

片岡 耕介;宮下 朋之;山川 宏

設計工学・システム部門講演会講演論文集2007(17)p.189 - 1922007年10月-2007年10月 

CiNii

詳細

ISSN:13480286

概要:This study treats the reduction of the degree of the passenger injury by analyzing the behavior of the passenger sitting on a box seat at the time of the collision outbreak of the railroad carriage by simulation. Judgment the degree of the passenger injury was enabled by development the behavior analysis program of the passenger with C language and inputting a decelerating acceleration wave pattern at the time of the vehicle collision obtained by the finite element analysis. Injury judgment values decreased by more than 30% by optimizing to assume the spring constant of the seat as a design variable to reduce an injury judgment value.

2106 データ包絡分析法による車両構造・性能データを用いた設計指針の検討(OS15 マーケットづくりのための設計)

福西 大智;宮下 朋之

設計工学・システム部門講演会講演論文集2007(17)p.119 - 1202007年10月-2007年10月 

CiNii

詳細

ISSN:13480286

概要:In this research, we analyzed the automotive market bringing the automotive performance from about 300000 models from which they were open to the public from 1982 to 2006 years about 20000 models by Data Envelopment Analysis. DEA is the method that can make clear about superiority or inferiority of business unit with multi-dimensional index and showing improvement of business unit. As a result, we can show trends from graph where horizontal axis was assigned as each performance index and vertical axis was assigned as each efficiency value obtained by DEA. We showed design index of automotive in the future by sensitivity analysis. From the above-mentioned method, we can confirm DEA is the effective method as method of evaluating products with multidimensional index.

3・4 CAE・最適化等についての研究動向(3.計算力学,<特集>機械工学年鑑)

宮下 朋之

日本機械学會誌112(1089)p.615 - 6162009年08月-2009年08月 

CiNii

詳細

ISSN:00214728

データ包絡分析法を用いた概念設計における発想支援に関する研究(機械要素,潤滑,設計,生産加工,生産システムなど)

佐藤 大祐;小林 正和;宮下 朋之

日本機械学會論文集. C編75(760)p.3355 - 33632009年12月-2009年12月 

CiNii

詳細

ISSN:03875024

概要:At an early stage of design process, it is required to discuss many ideas derived from design requirements using designer's knowledge and experiences. Especially, at conceptual design stage, many designers often discuss together about new product and discuss design ideas considering its effectiveness. However, according to increasing the complexity of the functions of products and variety of consumer's needs in recent years, it becomes difficult for designers to discuss about ideas by only conversations and figures. Then, in the conceptual design process, it is required to derive many ideas that meet the design requirement considering the complicated requirements. The derivation process of ideas often wastes the time because of the inertia of designer's thinking process. In this study, we will propose the method to support derivation process from the visualized relation using Data Envelopment Analysis. Through the experiment, we will confirm the effectiveness of our study.

G1201-1-1 鉄道車両衝撃時の乗員と車内設備の干渉における安全性の評価(車両・CAD)

島田 真行;宮下 朋之

年次大会講演論文集 : JSME annual meeting2009(4)p.193 - 1942009年09月-2009年09月 

CiNii

詳細

概要:This study treats human body model and cellular automata for analysis of the passenger behavior for the deceleration at the time of the railway accident. At this case, the deceleration obtained from simulation of the railroad carriage model is used for simulation suppose to collision to the rigid body wall. Consequently, it was shown that injury to the passenger was able to be reduced by the parameter of the partition and the floor when accident was occured.

2P1-C03 実時間性を考慮した有限要素解析法による変形シミュレーション : 力覚デバイスによる検証

山内 浩嗣;宮下 朋之;乾 正知;山川 宏

ロボティクス・メカトロニクス講演会講演概要集2006p."2P1 - C03(1)"-"2P1-C03(4)"2006年-2006年

CiNii

詳細

概要:In this study, we will review the previous studies treating same problem using FEM analysis and propose the method to treat the cutting simulation considering real time computation and simulation results are directly transferred to the user through the haptic device. The hex and tetra elements were used to model the structure using FEM analysis and dynamical response was calculated using wilson θ method. Here, the elements matrix was normalized according to the distance between a cutting device and nodes to omit the re-mesh procedures. The proposed method was implemented using three threads that handle graphics for display, dynamical calculation and model construction to improve the response for user operation. Then, we have developed the simulation system composed of the haptic device (PHANToM force feedback device) using ToolKit and the proposed method including graphics animation.

1P1-C10 拍動補償ロボットシステムの評価を目的とした拍動再現ロボットの開発(手術支援ロボティクス・メカトロニクス)

岡田 薫;加藤 篤;野口 豊弘;豊田 和孝;川村 和也;小林 洋;岡本 淳;宮下 朋之;藤江 正克

ロボティクス・メカトロニクス講演会講演概要集2008p."1P1 - C10(1)"-"1P1-C10(4)"2008年06月-2008年06月 

CiNii

詳細

概要:This paper presents the development of robot capable to simulate heartbeat. It is difficult to operate off-pump coronary-artery bypass surgery. Consequently, we develop the surgical robot system with heart-beat compensation. In the process of developing the robot system above, it is necessary to evaluate the tracking capability of the robot system quantitatively. Therefore, we developed the Robotic heart-beat simulator which evaluates the robot system. First of all, required specification of the robot was found by the heartbeat data in vivo experiment. Second, the link parameters of the robot that satisfy the specification were optimized. At the end, the robot was evaluated for accuracy of position and posture. As a result, the robot moved with maximum error of 0.28 [mm] and 0.54 [deg]. In addition, the robot was evaluated in the experiment of movement based on the heartbeat data, it showed a little error and time-lag, but utility of the robotic heartbeat simulator.

908 鉄道車両衝撃時の乗員と車内設備の干渉における安全性の評価(OS5.社会・環境・防災シミュレーション,ポスターセッションP-1,オーガナイズドセッション)

片岡 耕介;宮下 朋之

計算力学講演会講演論文集2008(21)p.73 - 742008年11月-2008年11月 

CiNii

詳細

ISSN:1348026X

概要:This study treats the reduction of the degree of the passenger injury by analyzing the behavior of 133 passengers being in a commuter vehicle at the time of the impact of the railroad accident outbreak with a computer. Judgment the degree of the injury of the passengers and inspection of the global safety was enabled by developing the behavior analysis program of the passengers with cellular automata with C language and analyzing with a large number of people. In addition, the safety improvement effect of the straps was confirmed by comparing the injury judgment value of the model increased the number of the straps to the normal model.

835 実時間性を考慮した穿刺シミュレーションのアルゴリズムの構築と評価(OS11.計算ソリッドバイオメカニクス(4),オーガナイズドセッション)

山中 真先;宮下 朋之

計算力学講演会講演論文集2008(21)p.642 - 6432008年11月-2008年11月 

CiNii

詳細

ISSN:1348026X

概要:The simulation system that calculates the behavior of the liver by needle insertion in real time, displays the results, and outputs the reaction force to the kinesthetic sense device was developed. The finite element method was used for the calculation of the behavior of the liver. Considering the calculation load, the algorithm to achieve the real-time processing was developed. The simulation system was evaluated from calculating load by using the liver models with different number of elements. It was the model with 905 elements and 209 nods that met the requirement for the real-time processing (calculation speed is 30Hz or more).

1907 内部移動と実時間を考慮した穿刺シミュレーション(OS19.計算ソリッドバイオメカニクス(2),オーガナイズドセッション)

吉武 佑祐;宮下 朋之

計算力学講演会講演論文集2009(22)p.591 - 5922009年10月-2009年10月 

CiNii

詳細

ISSN:1348026X

406 GPGPUを用いたセルラオートマトン法による簡易弾性体解析(OS4. 大規模並列・連成解析と関連話題(2),オーガナイズドセッション講演)

白井 朋彦;宮下 朋之

計算力学講演会講演論文集2010(23)p.337 - 3392010年09月-2010年09月 

CiNii

詳細

ISSN:1348026X

2206 小型人工衛星の構造最適化に関する研究(OS9-1 システム最適化,OS9 システム最適化)

齊藤 圭佑;宮下 朋之;角田 博明;渡辺 和樹

設計工学・システム部門講演会講演論文集2009(19)p.354 - 3592009年10月-2009年10月 

CiNii

詳細

ISSN:13480286

概要:Recently the development of the small satellite becomes active. In general, small satellites are expected to be developed faster and cheaper than the large satellites. A cost of a piggyback satellite is often decided by weight. Therefore it is important to reduce the weight of satellite for cost. Considering the severe mechanical environment of launching, we have to design satellite structure. The natural frequency of the satellite should be higher than the value decided by the launching and the satellite should bear the loads during launch. And the satellite should be considered with the value of the moment of inertia and a center of gravity because of stability of position. In this paper, we will propose the design of the satellite whose dimension is 20 centimeters cube. We focused on the trade-off design between minimization of stress condition and the appropriate center of gravity and the moment of inertia under the minimum natural frequency and the maximum mass for optimizing the satellite structures.

2417 鉄道車両の衝撃吸収性を考慮した構造最適化(OS7-4 設計と最適化IV-空力特性・積層構造-,OS7 設計と最適化)

小松崎 誠人;宮下 朋之

設計工学・システム部門講演会講演論文集2009(19)p.536 - 5412009年10月-2009年10月 

CiNii

詳細

ISSN:13480286

概要:As compared with automobile, few train design methods for crashworthiness have been proposed. To establish it, we paid attention to double structure composed of train exterior and cabin, and designed train finite element model. We changed the position and thickness of steel plates joining these two constituents, and simulated train collision to a rigid body wall at the speed of 60 kilometer per hour. As a result of the optimization, it was shown that distortional energy in the cabin and maximum deceleration were reduced. We discussed relation of between absorbed energy and maximum deceleration, and introduced new train structure.

1201 データ包絡分析法を用いた概念設計支援に関する研究(OS6 モデル駆動型の製品システム開発)

佐藤 正樹;宮下 朋之

設計工学・システム部門講演会講演論文集2010(20)p."1201 - 1"-"1201-6"2010年10月-2010年10月 

CiNii

詳細

ISSN:13480286

概要:In conceptual design phase, if designers are much more conscious of design objectives, they won't come up with various ideas about new product. On the other hand, using brainstorming allow to get various ideas, but to get a lot of unavailable ideas together. In this study, to support generating various and effective ideas in conceptual design, we propose two conceptual design support methods based on Data Envelopment Analysis and Analytic Hierarchy Process. The former is the method using several evaluation values to fill the gap of palate frontier and creating hierarchy graphs. The latter is method establishing a prioritized list of all ideas by paired comparison. Various information is given to the designer from these graphs when they conceive new ideas. We verified which technique is effective to obtain new ideas with high evaluation by comparing these two methods. The result shows that the proposed method using hierarchy graphs is more efficient than the other way using the prioritization graph.

1501 衝撃荷重を受ける梱包用構造物の監視デバイスに関する研究(GS1 一般セッション)

水野 智正;宮下 朋之

設計工学・システム部門講演会講演論文集2010(20)p."1501 - 1"-"1501-6"2010年10月-2010年10月 

CiNii

詳細

ISSN:13480286

概要:The corrugated cardboard is widely used for packing in the transportation. Therefore, the technology that minimizes various transportation accidents is necessary. Especially, the accidents by the impact occupies the more than the half of the accidents. There are many researches that evaluates the maximal acceleration of the corrugated cardboard under the impact. However, because the maximal acceleration is not necessarily corresponding to the damage of contents, it is difficult to evaluate the impact of the corrugated cardboard only by the maximal acceleration. Also the place to measure is the center of the ground side but it is not discussed about the measuring place. In this paper, impact force is applied by a free fall test by a guide rail to drop it straight to the ground. The ID acceleration sensor, are glued in several place to make clear the difference between the measured place. From the experiment, we considered impact energy and the maximal acceleration. In addition, we made an analytical model of the corrugated cardboard to analysis to identity the damage. As a result, strain energy has a correspondence between the experiment and the analysis and the maximal acceleration didn't have it. So, the utility of the strain energy was able to be shown as a method of evaluating the impact using FEM. Through this result, we watched how the energy spread and found out the center of the ground side and the wall side has a high energy when it's impacted and when a few second pasts the wall side still has a high energy because of the vibration of the cardboard. To find out the relation between the data from the corrugated cardboard and the contents. As a result, the maximal acceleration has a strong relation between the center of the ground side and the energy has a strong relation between the middle of the center and the corner. Finally, we also considered HIC36 to evaluate the impact.

2101 概念設計支援におけるデータ包絡分析法およびTRIZ理論の応用(OS10-1 創発と発想支援,OS10 創発性と多様性の設計)

佐藤 正樹;花田 龍;宮下 朋之

設計工学・システム部門講演会講演論文集2011(21)p.129 - 1342011年10月-2011年10月 

CiNii

詳細

ISSN:13480286

概要:In conceptual design phase, According paying attention to specific design objectives, designers sometimes avoid to get various ideas about new product. On the other hand, using brainstorming allows to get various ideas, but it causes a problem to obtain a lot of unavailable ideas together. In this study, to support generating various and effective ideas in conceptual design, we propose a conceptual design support method applying Data Envelopment Analysis and TRIZ. We proposed the method using several evaluation values to fill the gap of pareto frontier and creating hierarchy graphs. In this study, we propose the method using TRIZ at the Brain Storming stage in addition to the our proposed method. Various information is given to the designer from hierarchy relation graphically and TRIZ when they conceive new ideas. We verified which technique is effective to obtain new ideas with high evaluation by comparing these two methods. The result shows that the proposed method using TRIZ is more efficient than the other way not using TRIZ.

2403 鉄道車両の衝突時における乗客挙動の推定に関する実験的考察(GS1-2 一般セッションII,GS1 一般セッション)

田中 佑典;宮下 朋之

設計工学・システム部門講演会講演論文集2011(21)p.376 - 3812011年10月-2011年10月 

CiNii

詳細

ISSN:13480286

概要:An experiment on the estimation of a large number of passenger's behavior in under a train collision is studied using small train model. Here, we treated the position of passenger paying attention to a seat for seven persons. As a result of the experiment, passenger's head injury is influenced by seating position or coefficient of static friction of floor material. We discussed relation of between seating position or coefficient of static friction of floor material and passenger's head injury, and proposed four ideas reducing damage of passengers.

3202 人工衛星の機器配置を考慮した軽量化設計に関する研究(OS6-4 設計と最適化IV-構造設計への応用-,OS6 設計と最適化)

水町 星哉;宮下 朋之

設計工学・システム部門講演会講演論文集2011(21)p.537 - 5422011年10月-2011年10月 

CiNii

詳細

ISSN:13480286

概要:Recently the development of the nano satellite becomes active. In general, nano satellites are expected to be developed faster and cheaper than the large satellites. The launching cost of the piggyback satellite is reasonable, and then a cost of a piggyback satellite is often decided by weight. Therefore it is important to reduce the weight of satellite for cost. We have to design of satellite structure considering the severe mechanical environment of launching. The natural frequency of the satellite should be higher than the value decided by the rocket and the satellite should withstand the loads during launch. In this paper, we will propose the design of the satellite whose dimension is 400 millimeters cube. The satellite supposed to be launched by H-II A rocket and we focused on the trade-off design between minimization of mass and maximization of natural frequency under the maximum stress condition for optimizing the satellite structures.

2002 グラフィックスハードウエアによる3次元静解析の高度化に関する研究(OS20.次世代CAD/CAM/CAE/CG/CSCW/CAT/C-Control(1),OS・一般セッション講演)

小林 祐太;宮下 朋之

計算力学講演会講演論文集2011(24)p.589 - 5912011年10月-2011年10月 

CiNii

詳細

ISSN:1348026X

2309 肺構造の虚脱過程における変形挙動の推定に関する研究(バイオメカニクス(3),OS・一般セッション講演)

勝山 雄介;宮下 朋之

計算力学講演会講演論文集2011(24)p.648 - 6502011年10月-2011年10月 

CiNii

詳細

ISSN:1348026X

2P1-C08 乳房を構成する組織の非線形弾性率の測定と比較(医療ロボティクス・メカトロニクス)

築根 まり子;小林 洋;星 雄陽;宮下 朋之;藤江 正克

ロボティクス・メカトロニクス講演会講演概要集2011p."2P1 - C08(1)"-"2P1-C08(4)"2011年05月-2011年05月 

CiNii

詳細

概要:As the number of breast cancer patients increases, non- invasive and accuracy diagnosis of breast cancer is required. It is expected that there is diagnostic potential in examining the nonlinear elastic properties of soft tissues. The measurement method of the nonlinear elasticity of tumor in breast is needed. Therefore, we propose the robotic palpation system for diagnosis based the nonlinear elasticity. Here, we report the measurement of the nonlinear elastic properties of breast tissue components. The nonlinear elastic properties of breast tissue were investigated with a creep test. The three parameters of the nonlinear elastic model were acquired. In conclusion, two of these parameters are significantly different among the components. There was indicated that the magnitude of parameter is determined by tissue structure. There was suggested that the difference in parameter distribution causes the difference in dynamic response of breast tissue.

2A2-S09 RFAにおいて非対称形状の焼灼領域形成を可能にする電極針の機構の検討(手術支援ロボティクス・メカトロニクス(1))

磯部 洋佑;山崎 望;渡辺 広樹;小林 洋;宮下 朋之;大平 猛;橋爪 誠;藤江 正克

ロボティクス・メカトロニクス講演会講演概要集2012p."2A2 - S09(1)"-"2A2-S09(3)"2012年05月-2012年05月 

CiNii

詳細

概要:RFA is a treatment modality for cancer that is becoming accepted because of its less-invasiveness and high-curability. Controlling the shape of ablation area increases curative effect. Therefore we propose the mechanism of electrode needle that RF current flow between two secondary electrode needles. We examined the parameters required to obtain a trapezoidal ablation area surrounded by two electrode needles. The result of simulation, it was suggested that the relation of length and thickness of two needles affect ablation. In addition, we performed ablation experiments using agar phantoms. We evaluated the ablation shape of simulation and experiment as three-dimensional cube set. Then, we confirmed that result of simulation and experiments were in agreement.

1112 コンプライアントメカニズムによる衝撃吸収構造の創成に関する研究

中村 優太;服部 悠太;宮下 朋之

設計工学・システム部門講演会講演論文集2013(23)p."1112 - 1"-"1112-10"2013年10月-2013年10月 

CiNii

詳細

ISSN:13480286

概要:In this study, we try to design a shock absorbing structure using the compliant mechanism. To design the shock absorbing structure, it is necessary to consider the plastic deformation. We use the elastic-plastic body to design the compliant mechanism. First, we do topology optimization whose object function is to design the shock absorbing structure and the compliant mechanism. In this topology optimization, we use Evolutionary Structual Optimization. And we investigate the shape and the characteristic while the parameters fluctuation. Secondly, the impact test is done to confirm whether it is functioning as a shock absorbing structure. We test two models and compare the behavior of each model.

3307 データ包絡分析法を用いた概念設計支援に関する研究

高橋 優文;宮下 朋之

設計工学・システム部門講演会講演論文集2013(23)p."3307 - 1"-"3307-10"2013年10月-2013年10月 

CiNii

詳細

ISSN:13480286

概要:In the stage of a conceptual design, designers often stimulate and influence each other, and they must conceive a completely new idea and the outstanding idea. However, as a design problem, it is dependent on a designer's experience and intuition. Furthermore, the suggestion of an idea is sometimes plentifully performed by two or more persons, sharing of mutual knowledge or information for a smooth communication. Therefore, it is necessary to establish the reasonable design method to derive excellent idea, in this study, the new design approach which combined two design methods of an axiomatic design theory and TRIZ is proposed, the validity of a design method is confirmed. The axiomatic design theory clarifies the process in a design TRIZ offers the solution of a design which a designer didn't know. By combining these advantages, we will proposed a new method. The experiment using the proposed methods, technique nothing, TRIZ, the axiomatic design theory, and the TRIZ+ axiomatic design theory. And, it is verified what kind of difference the number of ideas or quality. As a result, TRIZ was able to conceive many ideas, but quality is inferior to other design methods. The axiomatic design theory could conceive the high quality idea, but a number of ideas are inferior to other design methods. Although the TRIZ+ axiomatic design theory had few ideas, the highest quality idea was able to be conceived.

3308 相似則及び最適化手法を活用した縮小衝突用ダミーモデルの設計に関する研究

高橋 宗平;宮下 朋之

設計工学・システム部門講演会講演論文集2013(23)p."3308 - 1"-"3308-10"2013年10月-2013年10月 

CiNii

詳細

ISSN:13480286

概要:Scaled dummy used in the experiment on the estimation of passenger's behavior under a train collision is designed considering a similarity rule. Several tests are applied to evaluate dummy biofidelity according to ISO technicalreport ISO/TR9790. Overall biofidelity of the dummy is 4.62 points out of 10. And it is the third-highest rating "Fair Biofidelity" out of 5 ratings indicating the degree of biofidelity. Next, Finite element is applied conducted to improve thoraxbiofidelity dummy using optimization method, suchas breadth of rib, thickness of soft tissue and Elastic Modulus of soft tissue because response on thoraximpact test is particularly bad. Optimized dummy is developed and thoraximpact test is conducted again. The maximum value of impactor force of optimized dummy is 28.1% better than that of unoptimized one.

J164034 ラジオ波焼灼療法における熱伝達率の大血管内流量依存性の検討([J164-03]医療・健康・福祉のためのセンシングおよびロボティクス(3))

菊池 勇人;磯部 洋佑;呂 筱薇;山崎 望大;渡辺 広樹;小林 洋;宮下 朋之;藤江 正克

年次大会 : Mechanical Engineering Congress, Japan2013p."J164034 - 1"-"J164034-4"2013年09月-2013年09月 

CiNii

詳細

概要:Radio frequency ablation (RFA) is one of the minimally invasive and useful treatments for liver cancer. While RFA is popular approach for liver cancer in Japan, RFA has several disadvantages such as ablation temperature is excess or insufficient. Because flow in great vessels absorbs the heat from electrode needle in liver RFA, it is difficult for surgeon to estimate the temperature distribution. In this study, we used the experimental system with porcine great vessels and porcine liver to investigate about the relationship between heat loss and flow volume in great vessels. We calculated the heat transfer coefficient based on Newton's law of cooling under each flow volume in each great vessel, and figured out the relationship between heat transfer coefficient and flow volume. As a result, heat transfer coefficient depends on flow volume in great vessels. And the relationship between heat transfer coefficient and flow volume is linearity. These results suggested that the relationship between flow volume in blood vessel and heat transfer coefficient is linearity, and flow volume in blood vessel causes heat loss in RFA.

408 鉄道車両の衝突における乗客挙動の推定に関する研究

高橋 宗平;田中 佑典;宮下 朋之

計算力学講演会講演論文集2013(26)p."408 - 1"-"408-3"2013年11月-2013年11月 

CiNii

詳細

ISSN:1348026X

2803 グラフィックスハードウェアを用いた焼結金属の超高速3次元非定常熱伝導解析法に関する研究

亀崎 浩輝;宮下 朋之

計算力学講演会講演論文集2013(26)p."2803 - 1"-"2803-3"2013年11月-2013年11月 

CiNii

詳細

ISSN:1348026X

J2410105 ラジオ波焼灼療法における電磁波周波数特性に基づく発熱量のモデル化([J241-01]医工学テクノロジーによる医療福祉機器開発(1))

山崎 望;小林 洋;菊池 勇人;呂 筱薇;草鹿 仁;宮下 朋之;藤江 正克

年次大会 : Mechanical Engineering Congress, Japan2014p."J2410105 - 1"-"J2410105-5"2014年09月-2014年09月 

CiNii

詳細

概要:Radio Frequency Ablation (RFA) is one kinds of hyperthermia treatment for cancer. Advantages of RFA are mainly low impact operations and shorter hospital stay. Disadvantage of RFA is difficult to get coagulation information for operator. Therefore, it needs to control ablation energy precisely. Thus, we have been proposed a method control of ablation energy. A feature of RFA, it uses electromagnetic-wave for ablation. RFA is related as not only thermal physics but also electrical physics. And, Heat generation from RF-electrode depends on frequency of electromagnetic-wave frequency. Therefore, in this study, we modeled heat generation based on electric impedance frequency characteristic during RFA. Firstly, it measured electric impedance frequency characteristic of pig liver samples. Secondly, it measured temperature distribution of the samples during RFA. Finally, it modeled electric impedance frequency characteristic of pig liver samples based on equivalent circuit model which was considered about fractional calculus. And, we evaluated a value of electrical impedance. From results, Model value of heat generation was matched with actual measurement value by using a coefficient of electrical impedance.

2208 コンプライアントメカニズムによる衝撃吸収構造の創成に関する研究(OS22-2.計算力学と最適化(2),OS・一般セッション講演)

服部 悠太;宮下 朋之

計算力学講演会講演論文集2012(25)p.154 - 1562012年10月-2012年10月 

CiNii

詳細

ISSN:1348026X

J165034 乳がん診断支援における弾性率の非線形性を計測する触診ロボットの開発 : 2本の圧子を用いた圧縮方法の有限要素解析による検討

築根 まり子;小林 洋;宮下 朋之;白石 泰之;山家 智之;橋爪 誠;藤江 正克

年次大会 : Mechanical Engineering Congress, Japan2012p."J165034 - 1"-"J165034-3"2012年09月-2012年09月 

CiNii

詳細

概要:A disadvantage of nonlinear elastography techniques for breast tumor diagnosis is that the tumor does not strain sufficiently to observe nonlinear elasticity We propose a robotic palpation system with two indenters to evaluate the nonlinear elasticity properties of tissues The objective of the present study was to consider a compression method in terms of the position of indenters and the section area of indenters to generate large strain in tumors by finite element analysis As a result, it was found that the following compression conditions made tumor deformable First condition is that the default position of indenter is located near the tumor Second condition is that the section area of indenters is enlarged if the default position of indenter is located near the tumor, and the section area of indenters is made smaller if the default position of indenter is distance from the tumor

力覚デバイスによる物体切断シミュレーション

乾 正知;宮下 朋之;山内 浩嗣

精密工学会学術講演会講演論文集2005(0)p.239 - 2402005年-2005年

CiNii

詳細

概要:物体切断における刃物にかかる反力の計算では、切断面において有限要素法による再メッシュを行う必要があり、計算量が膨大になるという問題があった。本研究では、粗いメッシュを用いた高速な変形計算と、得られた応力場より工具への反力の簡便な計算法を導入する事によって計算時間の短縮をはかり,計算結果を力覚デバイスに出力できる物体切断シミュレーションシステムを構築したので報告する。

データ包絡分析法を用いた概念設計支援に関する基礎的検討

佐藤 大祐;宮下 朋之

精密工学会学術講演会講演論文集2007(0)p.543 - 5442007年-2007年

CiNii

詳細

概要:概念設計段階における分野の異なる設計者集団の合意形成支援,及び目的に沿う多様なアイデアの発想支援を目的とする.複数のアイデアをアンケートで点数評価し,データ包絡分析法を用いて階層関係を提示することで,アイデアの上位関係の空間的な把握を支援する手法を提案した.CDプレーヤーを対象に被験者に概念設計を試行的に行い,提案手法の有用性の検討を行い,多様なアイデアを探索できる点で有用であることが認められた。

穿刺経路と保持器具の設計

モハマド カマロル;宮下 朋之;小林 洋;山川 宏;岡本 淳;藤江 正克

精密工学会学術講演会講演論文集2007(0)p.137 - 1382007年-2007年

CiNii

詳細

概要:The minimal invasive surgical technique used for treatments on cancer infected liver is comparatively to be effective due to fast recovery of the wound and the rehabilitation period. Needle insertion planning shows its difficulties when needle contact the tissue structures and become complicated with existence of gravity, cancer size and position, needle properties and surrounding organs. In this study, a constitutive equation of viscoelastic material properties of liver is formulated using measured experimental results on pig′s liver. 3-D Finite Element Model is created using sliced MRI images. Approximations were made on friction between needle and soft tissue, and the condition of tear-off elements integrated with quasi-static analysis. In simulation, we proposed a retainer tool to minimize the displacement of the cancer infected part as a new boundary condition. Numerical results by proposed boundary condition technique show the possibility to design a new device in order to navigate needle to hit the cancer precisely.

力覚を伴う穿刺シミュレータの構築と評価

中村 拓真;宮下 朋之;山川 宏

精密工学会学術講演会講演論文集2007(0)p.141 - 1422007年-2007年

CiNii

詳細

概要:臓器の変形,器具への力覚を提示する手術訓練シミュレーションシステムが多く開発されている.有限要素法は大規模行列演算であり,実時間計算を妨げる要因となっている.そこで計算手法を簡略化し,実時間内で穿刺時における力学現象を解析し,力覚を提示するシステムを構築する.反力を臓器モデルの内部応力から算出する簡易的手法を提案し,モデルの粒度と計算時間の観点からシステムの評価を行い,本研究の有効性を示した.

Optimum design using search agents

Miyashita, Tomoyuki; Yamakawa, Hiroshi

Proceedings of the ASME Design Engineering Technical Conference2p.19 - 262001年12月-2001年12月 

Scopus

詳細

概要:Many optimization methods and practical softwares have been developing for many years and most of them are very effective, especially to solve practical problems. But, non-linearity of objective functions and constraint functions, which have frequently seen in practical problems, has caused a difficulty in optimization. This difficulty mainly lies in the existence of several local optimum solutions. In this study, we have proposed a new global optimization methodology that provides an information exchange mechanism in the nearest neighbor method. We have developed a simple software system, which treated each design point in optimization as an agent. Many agents can search the optima simultaneously exchanging the their information. We have defined two roles of the agents. Local search agents have roles on searching local optima by such an existing method as the steepest decent method and so on. Stochastic search agents investigate the design space by making use of the information from other agents. Through simple and several structural optimization problems, we have confirmed the advantages of the method.

Particle swarm optimization using projection matrix for behavior constraints

Miyashita, Tomoyuki

Collection of Technical Papers - 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference1p.122 - 1282006年12月-2006年12月 

Scopus

詳細

概要:Particle Swam Optimization is one of useful optimization method that has a global search ability and is easy to implement. However there are some difficulties are observed for behavior constraints. This paper proposes a new approach to treat behavior constrains by projection of velocity vector of particles. By projection of velocity vector particks could approach feasible region formed by active constraints. Through several numerical examples, it is recognized better converge performance than original PSO. Copyright © 2006 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

A simulation method for 3-dimension needle invasive medical treatments of cancer infected liver

Zamani, Md Kemarol; Tomoyuki, Miyashita; Yamakawa, Hiroshi

Proceedings of the 5th IASTED International Conference on Biomedical Engineering, BioMED 2007p.43 - 492007年12月-2007年12月 

Scopus

詳細

概要:The medical insertion treatments on cancer infected liver seem to be very effective because of low invasion for patients. Planning for insertion procedure is difficult because the interaction between needle and soft tissue become complicated and the liver may deform largely under the influence of such gravity, cancer, position of needle and so on. It is of significant to grasp natural properties and deformations of liver during medical needle insertion. In this study, viscoelastic material properties are measured by experiments and constitutive equation is formulated based on the experimental results. Then a liver is modeled by finite elements made from the sliced MRI images. 3-Dimensional needle insertion procedures are simulated by quasi-static analysis assuming friction between the needle and soft tissue and conditions of tear-off elements. From the numerical results by the proposed simulation method, it is found that some navigation of the needle insertion is necessary to hit the cancer correctly.

A study on idea generation method for concept design using data envelopment analysis

Satoh, Daisuke; Kobayashi, Masakazu; Miyashita, Tomoyuki

Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C75(760)p.3355 - 33632009年12月-2009年12月 

Scopus

詳細

ISSN:03875024

概要:At an early stage of design process, it is required to discuss many ideas derived from design requirements using designer's knowledge and experiences. Especially, at conceptual design stage, many designers often discuss together about new product and discuss design ideas considering its effectiveness. However, according to increasing the complexity of the functions of products and variety of consumer's needs in recent years, it becomes difficult for designers to discuss about ideas by only conversations and figures. Then, in the conceptual design process, it is required to derive many ideas that meet the design requirement considering the complicated requirements. The derivation process of ideas often wastes the time because of the inertia of designer's thinking process. In this study, we will propose the method to support derivation process from the visualized relation using Data Envelopment Analysis. Through the experiment, we will confirm the effectiveness of our study.

Quantitative palpation to identify the material parameters of tissues using reactive force measurement and finite element simulation

Hoshi, Takeharu; Kobayashi, Yo; Miyashita, Tomoyuki; Fujie, Masakatsu G.

IEEE/RSJ 2010 International Conference on Intelligent Robots and Systems, IROS 2010 - Conference Proceedingsp.2822 - 28282010年12月-2010年12月 

DOIScopus

詳細

概要:In this paper we present a new robotic palpation method to perform quantitative measurement of the material parameters of human tissues, for use in medical applications. The proposed method is achieved by the use of a system that integrates a robotic component and a numerical simulation component. The robotic component is used to measure the contact force and displacement at each point on the human body contacted by a robotic probe. The numerical simulation component identifies the material parameters using the proposed method, where two data sources are used, namely, (1) the measured data from the robotic part, and (2) simulated deformation data obtained by the finite element method. In order to validate the proposed system, we report initial results from several phantom tissue experiments, which demonstrate the ability of the system to quantitatively determine the elastic moduli of tissues. We also discuss several potential challenges in the future of the proposed system. ©2010 IEEE.

Investigation of lung lethargy deformation using finite element method

Zamani, M. K.; Yamanaka, M.; Miyashita, T.; Ramli, R.

IFMBE Proceedings35 IFMBEp.170 - 1742011年07月-2011年07月 

DOIScopus

詳細

ISSN:16800737

概要:Lung cancer has become one of most killing disease in 20th century. There are various external and internal causes identified by experts to be the causes of this disease. Various type of treatments have been developed taking account on the stage and condition of cancer itself, such as Radiation Therapy, Chemotherapy and Surgery. In this paper, a method called Thoracoscopy is focused for improvement by investigating a possibility of using finite element method (FEM) to predict deformation and movement of tumor during lung lethargy process as a preparation stage for this surgery method to be deployed. Thoracoscopy is suitable for stage-I cancer, as it will only create a small incisions on the skin and has high possibility to cure by removing the tumor. This paper used a commercial FEM tool to model lung in 3-dimension and by using tested data of material properties, a simulated result of lung lethargy process was compared with experimental data. Results revealed a few promising points to further develop this virtual capability and use it to predict deformation prior the surgery. © 2011 Springer-Verlag.

A improvement method of conceputual design ideas using Data Envelopment Analysis

Miyashita, Tomoyuki; Satoh, Daisuke

DS 58-6: Proceedings of ICED 09, the 17th International Conference on Engineering Design6(PART 2)p.13 - 222009年12月-2009年12月 

Scopus

詳細

概要:The designers often are required to derive ideas of the products satisfying requirements of users and market. To accomplish to derive good design, it is important to have much information for previous designs and collaborate with the other designers. At an early stage of design process, several designers have to derive ideas considering its evaluation in cooperation. In this stage, some existing methods to support thinking processes among several persons are useful. However, it is difficult to give a direction for discussion because a reasonable evaluation of ideas is difficult and it is also difficult for the evaluation to be accepted by the other designers. In this study, we propose a method to support generating various and effective ideas in conceptual design process. The ideas are mathematically defined to have factors of evaluation and features and numerically treated in these factors space. Data Envelopment Analysis (DEA) is applied for ideas having many factors of evaluation to derive reasonably a scalar value for evaluation result. DEA gives us a segment of many ideas and from this segment we can discuss a new idea. To support deriving a new idea, we have identified nonlinear mathematical model between factors of evaluation and features and optimization method was applied for the identified model. The proposed method is applied for the experiment and we could confirm the effectiveness of the proposed method.

Product design optimization method considering the integrated satisfaction level

Yoshimura, Masataka; Satou, Masaki; Miyashita, Tomoyuki; Yamakawa, Hiroshi

Proceedings of the IASTED International Conference on Engineering and Applied Science, EAS 2012p.303 - 3102012年12月-2012年12月 

DOIScopus

詳細

概要:We propose a product design optimization method that maximizes the integrated satisfaction level for evaluative factors. Product designs include many evaluative factors that have complex interrelationships. To cope with such circumstances, we construct strategies and a practical method to obtain optimum design solutions. First, the evaluative items for the product are listed and each item is decomposed into evaluative factors. Next, to express designers' or potential customers' levels of satisfaction for the characteristic values of each evaluative factor, we define satisfaction functions that incorporate the relationship between characteristic values and satisfaction levels. Weighting coefficients for the evaluative factors are then obtained by the pair comparison method. Finally, an integrated satisfaction level is formulated by summing the characteristic values with their weighting coefficients over the entire set of evaluative factors. The integrated satisfaction level of the objective function is maximized, and optimum design solutions with maximum satisfaction levels are then obtained. If necessary, these solutions can be modified and improved by re-examining and adjusting the satisfaction functions and weighting coefficients. Furthermore, the proposed method can be used to find schemes that improve the integrated satisfaction level. The utility of the proposed method is demonstrated using a passenger train coach design.

Derivation of the relationship between the rate of temperature rise and viscoelasticity for constructing a coagulation model for liver radio frequency ablation

Lu, Xiaowei; Watanabe, Hiraki; Isobe, Yosuke; Yamazaki, Nozomu; Kobayashi, Yo; Miyashita, Tomoyuki; Fujie, Masakatsu G.

Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBSp.382 - 3852013年10月-2013年10月 

DOIScopus

詳細

ISSN:1557170X

概要:Radio frequency ablation (RFA) is usually conducted using ultrasound (US) imaging to monitor the insertion procedure and the coagulation extent of liver tissue which is contiguous to the RFA electrode. However, when RFA surgery is started, the US image becomes unclear because of water vapor. This disadvantage of RFA can lead to excessive and insufficient RFA thereby diminishing the advantages of the procedure. In the present study, we proposed a simulation system which shows the progress status of coagulation for liver RFA. To derive the coagulation characteristics in liver RFA, we used the viscoelasticity of liver tissue as the coagulation indicator to investigate coagulation development for liver RFA. This paper shows the acquisition procedures for analyzing the relationship between the rate of temperature and viscoelasticity. We measured the complex modulus of porcine liver tissue under different rate of temperature in RFA by controlling the output power. We showed that the viscoelasticity of liver tissue depended on temperature previous temperature increase above 60°C. This result indicates that in RFA, controlling the output power is important to completely coagulate the tumor. © 2013 IEEE.

Boundary condition generating large strain on breast tumor for nonlinear elasticity estimation

Tsukune, Mariko; Hatano, Maya; Kobayashi, Yo; Miyashita, Tomoyuki; Fujie, M. G.

Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBSp.4863 - 48662013年10月-2013年10月 

DOIScopus

詳細

ISSN:1557170X

概要:We describe a robotic palpation system that determines whether a breast tumor is benign or malignant by measuring its nonlinear elasticity. Two indenters compress the breast from different directions to generate sufficient strain on the inner tumor, which simply represents clinical dynamic testing. The nonlinear elasticity of the inner tumor is estimated by correcting the reaction force data of the surrounding soft tissue. Here, we present the basic concept of our study and simulation results considering geometric conditions of the indenters using a finite element breast model. Indenters with variable width are applied to the breast at several contact positions in a simulation for comparison. Our results indicate that when the spring stiffness between the contact position of one indenter and the center of the tumor equals the spring stiffness between the contact position of the other indenter and the center of the tumor, a larger contact area (i.e., larger spring stiffness) provides larger strain acting on the inner tumor. © 2013 IEEE.

The relation between temperature distribution for lung RFA and electromagnetic wave frequency dependence of electrical conductivity with changing a lung's internal air volumes

Yamazaki, Nozomu; Watanabe, Hiroki; Lu, Xiaowei; Isobe, Yosuke; Kobayashi, Yo; Miyashita, Tomoyuki; Fujie, Masakatsu G.

Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBSp.386 - 3912013年10月-2013年10月 

DOIScopus

詳細

ISSN:1557170X

概要:Radio frequency ablation (RFA) for lung cancer has increasingly been used over the past few years because it is a minimally invasive treatment. As a feature of RFA for lung cancer, lung contains air during operation. Air is low thermal and electrical conductivity. Therefore, RFA for this cancer has the advantage that only the cancer is coagulated, and it is difficult for operators to control the precise formation of coagulation lesion. In order to overcome this limitation, we previously proposed a model-based robotic ablation system using finite element method. Creating an accurate thermo physical model and constructing thermal control method were a challenging problem because the thermal properties of the organ are complex. In this study, we measured electromagnetic wave frequency dependence of lung's electrical conductivity that was based on lung's internal air volumes dependence with in vitro experiment. In addition, we validated the electromagnetic wave frequency dependence of lung's electrical conductivity using temperature distribution simulator. From the results of this study, it is confirmed that the electromagnetic wave frequency dependence of lung's electrical conductivity effects on heat generation of RFA. © 2013 IEEE.

Real-time temperature control system based on the finite element method for liver radiofrequency ablation: Effect of the time interval on control

Isobe, Yosuke; Watanabe, Hiroki; Yamazaki, Nozomu; Lu, Xiaowei; Kobayashi, Yo; Miyashita, Tomoyuki; Hashizume, Makoto; Fujie, Masakatsu G.

Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBSp.392 - 3962013年10月-2013年10月 

DOIScopus

詳細

ISSN:1557170X

概要:Radiofrequency (RF) ablation is increasingly being used to treat liver cancer because it is minimally invasive. However, it is difficult for operators to control the size of the coagulation zones precisely, because no method has been established to form an adequate and suitable ablation area. To overcome this limitation, we propose a new system that can control the coagulation zone size. The system operates as follows: 1) the liver temperature is estimated using a temperature-distribution simulator to reduce invasiveness; 2) the output power of the RF generator is controlled automatically according to the liver temperature. To use this system in real time, both the time taken to calculate the temperature in the simulation and the control accuracy are important. We therefore investigated the relationship between the time interval required to change the output voltage and temperature control stability in RF ablation. The results revealed that the proposed method can control the temperature at a point away from the electrode needle to obtain the desired ablation size. It was also shown to be necessary to reduce the time interval when small tumors are cauterized to avoid excessive treatment. In contrast, such high frequency feedback control is not required when large tumors are cauterized. © 2013 IEEE.

Development of a coagulation area presenting system in liver radio frequency ablation (Modeling for temperature-dependence of viscoelasticity in liver tissue)

Lu, Xiaowei; Tsukune, Mariko; Watanabe, Hiroki; Kobayashi, Yo; Miyashita, Tomoyuki; Fujie, Masakatsu G.

Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C79(807)p.4381 - 43882013年12月-2013年12月 

Scopus

詳細

ISSN:03875024

概要:Recently radio frequency ablation (RFA) has been increasingly important in treating liver cancers. RFA is ordinarily conducted using elastographic imaging to monitor the ablation procedure and the temperature of the electrode needle is displayed on the radiofrequency generator. However, the coagulation boundary of liver tissue in RFA is unclear and unconfident. This can lead to both excessive and insufficient RFA thereby diminishing the advantages of the procedure. In the present study, we developed a method for determining the coagulation boundary of liver tissue in liver RFA. To investigate this boundary we used the mechanical characteristics of biochemical components as an indicator of coagulation to produce a relational model for viscoelasticity and temperature. This paper presents the data acquisition procedures for the viscoelasticity characteristics and the results of relationship model of viscoelasticity's temperature dependence. We employed a rheometer to measure the viscoelastic characteristics of porcine liver tissue. To determine relationship model between temperature and viscoelasticity, we used a least-square method and the minimum root mean square error was calculated to optimize the model functional relations. The functional relation between temperature and viscoelasticity was divided into linear and non-linear in different temperature regions. The boundary between linear and non-linear functional relation was 58.0°C. © 2013 The Japan Society of Mechanical Engineers.

Product design optimization method considering the integrated satisfaction level

Yoshimura, Masataka; Sato, Masaki; Miyashita, Tomoyuki; Yamakawa, Hiroshi

Control and Intelligent Systems41(3)p.117 - 1262013年01月-2013年01月 

DOIScopus

詳細

ISSN:14801752

概要:We propose a product design optimization method that maximizes the integrated satisfaction level for evaluative factors. Product designs include many evaluative factors that have complex interrelationships. To cope with such circumstances, we construct strategies and a practical method to obtain optimum design solutions. First, the evaluative items for the product are listed and each item is decomposed into evaluative factors. Next, to express designers' or potential customers' levels of satisfaction for the characteristic values of each evaluative factor, we define satisfaction functions that incorporate the relationship between characteristic values and satisfaction levels. Weighting coefficients for the evaluative factors are then obtained by the pair comparison method. Finally, an integrated satisfaction level is formulated by summing the characteristic values with their weighting coefficients over the entire set of evaluative factors. The integrated satisfaction level of the objective function is maximized, and optimum design solutions with maximum satisfaction levels are then obtained. If necessary, these solutions can be modified and improved by re-examining and adjusting the satisfaction functions and weighting coefficients. Furthermore, the proposed method can be used to find schemes that improve the integrated satisfaction level. The utility of the proposed method is demonstrated using a passenger train coach design.

Modeling of lung's electrical impedance using fractional calculus for analysis of heat generation during RF-ablation

Yamazaki, Nozomu; Kobayashi, Yo; Kobayashi, Yo; Kikuchi, Hayato; Isobe, Yosuke; Lu, Xiaowei; Miyashita, Tomoyuki; Fujie, Masakatsu G.

2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2014p.5323 - 53282014年01月-2014年01月 

DOIScopus

詳細

概要:© 2014 IEEE. Recently, Radio Frequency Ablation (RFA) is becoming a popular therapy for various cancers such as liver, breast, or lung cancer. RFA is one kinds of thermal therapy. However, it has been often reported about excessive ablation or non-ablation due to difficult control of ablation energy. In order to solve these difficulties, we have been proposed robotized RF-ablation system for precise cancer treatment. We have been tried to control heat energy by control of electromagnetic-wave frequency. In this paper, we reported about relation among electrical impedance of lung, lung's internal air volumes, and heat energy by use of electromagnetic-wave. In case of RFA for lung cancer, heat energy depends on electrical impedance and lung's internal air volumes. Electrical impedance has the dependence of electromagnetic-wave frequency and the dependence of lung's internal air volumes. Therefore, firstly we considered about fractional calculus model between lung's internal air volumes and electrical impedance. Secondly, we measured electric impedance frequency characteristic of lung with change of lung's internal air volumes. The measured and modeled results showed that use of fractional calculus realized high accurate model for electrical impedance of lung. And, from the results of numerical analysis of heat energy, it is supposed that control of electromagnetic-wave frequency has a small effectiveness for lung tissue ablation even if lung includes abundant air.

The topology optimization of electronic parts mounted on micro satellite

Nakamura, H.; Miyashita, T.

Engineering Optimization IV - Proceedings of the 4th International Conference on Engineering Optimization, ENGOPT 2014p.379 - 3842014年01月-2014年01月 

Scopus

詳細

概要:© 2015 Taylor & Francis Group, London. Printed Circuit Boards (PCBs) are important for operation of actuators to work machines and required upgrading and downsizing. To develop upgrading PCBs needs design based on evaluation criteria. In this study, we verified the availability of GA in pattern design of PCBs by use of the electric power board on WASEDA-SAT2 (small satellite) as a model. As a result, the smaller board by 35% was obtained than the board before optimization.

Learning the optimal product design through history

Parque, Victor; Miyashita, Tomoyuki

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)9489p.382 - 3892015年01月-2015年01月 

DOIScopus

詳細

ISSN:03029743

概要:© Springer International Publishing Switzerland 2015. The search for novel and high-performing product designs is a ubiquitous problem in science and engineering: aided by advances in optimization methods the conventional approaches usually optimize a (multi) objective function using simulations followed by experiments. However, in some scenarios such as vehicle layout design, simulations and experiments are restrictive, inaccurate and expensive. In this paper, we propose an alternative approach to search for novel and highperforming product designs by optimizing not only a proposed novelty metric, but also a performance function learned from historical data. Computational experiments using more than twenty thousand vehicle models over the last thirty years shows the usefulness and promising results for a wider set of design engineering problems.

3305 データ包絡分析法による車両構造・性能データを用いた設計指針の検討

福西 大智;宮下 朋之

設計工学・システム部門講演会講演論文集2008(18)p.529 - 5342008年09月-2008年09月 

CiNii

詳細

ISSN:13480286

概要:In this research, we analyzed the automotive data that contain bringing the automotive performance from about 300000 models from which they were open to the public from 1982 to 2006 years about 20000 models by Data Envelopment Analysis. DEA is the method that can make clear superiority or inferiority of business unit with multi-dimensional index and showing improvement direction of business unit. As a result, we can show trends from graph where horizontal axis was assigned as each performance index and vertical axis was assigned as each efficiency value obtained by DEA. We showed design index of automotive in the future by sensitivity analysis. From the above-mentioned method, we can confirm DEA is the effective method as method of evaluating products with multi-dimensional index.

2A1-A03 転移性癌手術を対象とした呼吸器外科ナビゲーション

吉澤 愛子;小林 洋;岡本 淳;宮下 智之;山川 宏;藤江 正克

ロボティクス・メカトロニクス講演会講演概要集2006p."2A1 - A03(1)"-"2A1-A03(4)"2006年-2006年

CiNii

詳細

概要:This paper shows the development of a respiratory surgical navigation system for the metastasis cancer in a collapsed lung. This system has two navigation methods, (a) Collapsed simulation,(b) Palpation using manipulator. Collapsed simulation provides the position of the cancer in a collapsed lung using the preoperative CT Data. Palpation using manipulator after collapsed simulation provide more precise position of collapsed lung.

A study on immune algoriths considering interaction of design with environment properties

Miyashita, Tomoyuki; Yamakawa, Hiroshi

Proceedings of the ASME Design Engineering Technical Conference2 Bp.945 - 9502003年12月-2003年12月 

Scopus

詳細

概要:In design problems, designers have to decide many properties of products to satisfy requirements from users or market. The designers also have to consider the environment under the use of the products and the environment is often unpredictable or difficult to be determined in detail. The optimization techniques are useful to support the designers to decide the properties of the product. However, it is required before the application of the optimization techniques to formulate mathematical models and it is difficult to formulate the all properties of products, for examples preferences of the customer. In this situation, it seems to be useful to derive several solutions that equip the variety or diversity about the value of design variables or objective functions. In this paper, the new method to derive several solutions using immune algorithms is described. The proposed method equips the interaction mechanism between the design parameter and the environment parameters. Through some numerical examples of the structural design problems and job-shop scheduling problems, the effectiveness is confirmed.

An examination on the supervisor system in multidisciplinary design optimization under conflict objects

Miyashita, Tomoyuki; Miyashita, Tomoyuki; Yamakawa, Hiroshi; Yamakawa, Hiroshi

8th Symposium on Multidisciplinary Analysis and Optimization2000年12月-2000年12月 

Scopus

詳細

概要:In the design of products, the designers often have to improve some objects and to satisfy some constraints. Furthermore, these days, it is more important than before to design and develop the products shortly and to commercialize the products for the profit. These needs time-consuming decision-makings and we often treat this problem as multi-objective design problems. However it is difficult for the designers who have no knowledge of the other disciplines when to decide the design collaboratively. Therefore, in this paper, we proposed a method to show some compromise to the designers and developed a system operated through computer network. © 2000 The American Institute of Aeronautics and Astronautics Inc. All rights reserved.

Affordable Sensor Fusion for Wireless Control of External Devices

Raessa Mohamed S.;Parque Victor;Miyashita Tomoyuki

The ... international conference on advanced mechatronics : toward evolutionary fusion of IT and mechatronics : ICAM : abstracts2015(6)p.86 - 872015年12月-2015年12月 

CiNii

詳細

ISSN:13488961

概要:Developing affordable and robust human-machine interfaces is key to improve the quality of life of handicapped and amputee users in developing countries. While most of the available technologies are robust, the cost is inaccessible to large portions of the population with low-income. In this paper, we propose a compact, robust and cost-effective interface for arm pose sensing and control of external devices based on the low-cost accelerometer, gyroscope and Xbee technologies. Experiments using a prototype showed the promising results to detect and classify the robust poses.

Optimum Design of Wind Turbine Drivetrain

Naung Shine Win;Miyashita Tomoyuki

The ... international conference on advanced mechatronics : toward evolutionary fusion of IT and mechatronics : ICAM : abstracts2015(6)p.152 - 1532015年12月-2015年12月 

CiNii

詳細

ISSN:13488961

概要:This article aims to propose a methodology to produce an optimum design of wind turbine drivetrain with the main objectives of minimum vibration, minimum weight and maximum efficiency.

Optimization of ZigBee Networks using Bundled Routes

Parque Victor;Seleem Ibrahim A.;Raessa Mohamed S.;Miyashita Tomoyuki

The ... international conference on advanced mechatronics : toward evolutionary fusion of IT and mechatronics : ICAM : abstracts2015(6)p.223 - 2242015年12月-2015年12月 

CiNii

詳細

ISSN:13488961

概要:Designing optimal ZigBee networks is key for efficient low-cost communication of multi-agent sensors and mechatronics systems. In this paper, we report a novel approach to optimize ZigBee networks using the optimization of bundled routes. To the best of our knowledge, this is the first approach reported in the literature to find optimal ZigBee network topologies.

2211 市場データを用いた車両設計指標の構築と最適化設計に関する研究(OS1-2 製品設計開発のためのモデリング・方法論・マネジメントII,OS1 製品設計開発のためのモデリング・方法論・マネジメント)

保延 和博;宮下 朋之

設計工学・システム部門講演会講演論文集2015(25)p."2211 - 1"-"2211-9"2015年09月-2015年09月 

CiNii

詳細

ISSN:13480286

概要:In this research, we proposed a criteria development process treating about 23000 vehicle data which were published on the market from 1982 to 2013 years by Data Envelopment Analysis. DEA is the method for obtaining an evaluation with multidimensional index. However, it is necessary to determine the evaluation model. So we constructed it by Interpretive Structural Modeling. ISM builds a hierarchical structure from paired comparison, and clarifies the relationship between items. As a result, we derived 32 evaluation models from ISM and decided the best model based on the standard deviation to be maximized. This makes it possible to avoid the arbitrariness of the user. In the best model, vehicle data which have lower fuel efficiency obtain higher comprehensive evaluation value. Otherwise, in displacement and price, minimum comprehensive evaluation value is in the middle, vehicle data which has lower and higher evaluation item value obtain higher comprehensive evaluation value. In addition, we optimized the value of each evaluation item for vehicle type and obtained proposition for design for each type, which proposed smaller displacement and shape. From the above, we confirm that DEA is useful for evaluating products and ISM is efficiency for constructing the evaluation model of DEA.

Succinct Representation of Directed Graphs

Parque Victor;Miyashita Tomoyuki

精密工学会学術講演会講演論文集2016(0)p.577 - 5782016年-2016年

CiNii

詳細

概要:Directed graphs are useful to encode oriented dependencies among entities. We propose a new method that enables the representation of directed graphs via numbers; enabling the succinct, canonical and efficient encoding schemes. We present examples in graph encoding and its applicability to real world networks.

Simple empirical model for identifying rheological properties of soft biological tissues

Kobayashi, Yo; Kobayashi, Yo; Kobayashi, Yo; Tsukune, Mariko; Miyashita, Tomoyuki; Fujie, Masakatsu G.

Physical Review E95(2)2017年02月-2017年02月 

DOIScopus

詳細

ISSN:24700045

概要:© 2017 American Physical Society. Understanding the rheological properties of soft biological tissue is a key issue for mechanical systems used in the health care field. We propose a simple empirical model using fractional dynamics and exponential nonlinearity (FDEN) to identify the rheological properties of soft biological tissue. The model is derived from detailed material measurements using samples isolated from porcine liver. We conducted dynamic viscoelastic and creep tests on liver samples using a plate-plate rheometer. The experimental results indicated that biological tissue has specific properties: (i) power law increase in the storage elastic modulus and the loss elastic modulus of the same slope; (ii) power law compliance (gain) decrease and constant phase delay in the frequency domain; (iii) power law dependence between time and strain relationships in the time domain; and (iv) linear dependence in the low strain range and exponential law dependence in the high strain range between stress-strain relationships. Our simple FDEN model uses only three dependent parameters and represents the specific properties of soft biological tissue.

A method to learn high-performing and novel product layouts and its application to vehicle design

Parque, Victor; Parque, Victor; Miyashita, Tomoyuki

Neurocomputing248p.41 - 562017年07月-2017年07月 

DOIScopus

詳細

ISSN:09252312

概要:© 2017 Elsevier B.V. In this paper we aim at tackling the problem of searching for novel and high-performing product designs. Generally speaking, the conventional schemes usually optimize a (multi) objective function on a dynamic model/simulation, then perform a number of representative real-world experiments to validate and test the accuracy of the some product performance metric. However, in a number of scenarios involving complex product configuration, e.g. optimum vehicle design and large-scale spacecraft layout design, the conventional schemes using simulations and experiments are restrictive, inaccurate and expensive. In this paper, in order to guide/complement the conventional schemes, we propose a new approach to search for novel and high-performing product designs by optimizing not only a proposed novelty metric, but also a performance function which is learned from historical data. Rigorous computational experiments using more than twenty thousand vehicle models over the last thirty years and a relevant set of well-known gradient-free optimization algorithms shows the feasibility and usefulness to obtain novel and high performing vehicle layouts under tight and relaxed search scenarios. The promising results of the proposed method opens new possibilities to build unique and high-performing systems in a wider set of design engineering problems.

Expantion and measurement of spiral foldedmembrane by small satellite

Miyashita, Tomoyuki; Miyashita, Tomoyuki; Yamakawa, Hiroshi; Yamakawa, Hiroshi; Katsumata, Nobuhisa; Katsumata, Nobuhisa; Natori, Michihiro C.

AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting2017年01月-2017年01月 

DOIScopus

詳細

概要:© 2017 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.The small sattelites become popular due to the development of electrical parts and frequent launch opportunities. In this sudy, we will introduce one of our missions on orbit by 1U size small satellite Waseda-SAT3. This satellite have two main missions. One is thermal active control by soft matter and the other is measurement of shpe of membrane expanded from spiral folded shape supported by hinge-less mast. The membrane installed in this satellite has parabolic surface and painted innerside to measure shape by lattice projection method and equips solor cell outside to show effectiveness of spiral folding theory considering thickness effect of the membrane.

A study on the design of deployable cable-panel structure

Seino, Koujirou; Parque, Victor; Miyashita, Tomoyuki

4th AIAA Spacecraft Structures Conference, 20172017年01月-2017年01月 

Scopus

詳細

概要:© 2017, American Institute of Aeronautics and Astronautics Inc, AIAA. All rights reserved.Recently, large space structures are being developed. From the point of view of payload capacity and transportation efficiency, large space structures are required to be lightweight and highly efficient in their folding. Cable-panel structures are also expected to satisfy the above conditions mainly due to the omission of frames that hold panels structures. However, the deployment of three-dimensional membranes is difficult to control accurately because of the small stiffness normal to membranes. In this study, we discuss the wire location design in the wire-based deployment of three-dimensional plates. And, through experiments, we evaluate 27 design locations of wires for deployment and compare the deployed shape between the designed dimensions and the measured surface. Then, we confirmed the increment of 2.2 percent in height dimension. Furthermore, we confirmed that our proposed deployment method is feasible, and obtained several design criteria for wire design: First, it is necessary to consider an order of deployment to deploy from the outside surface. Second, the design needs to intersect folds at right angles. Third, extending the length of designs without changing the route shape of the designs leads to higher accuracy of the deployment shape without causing a large increase in the required forces. The multi particle system model was applied to predict the deformation of the structure reasonablly.

On succinct representation of directed graphs

Parque, Victor; Parque, Victor; Miyashita, Tomoyuki

2017 IEEE International Conference on Big Data and Smart Computing, BigComp 2017p.199 - 2052017年03月-2017年03月 

DOIScopus

詳細

概要:© 2017 IEEE. Directed graphs encode meaningful dependencies among objects ubiquitously. This paper introduces new and simple representations for labeled directed graphs with the properties of being succinct (space is information-theoretically optimal); in which we avoid exploiting a-priori knowledge on digraph regularity such as triangularity, separability, planarity, symmetry and sparsity. Our results have direct implications to model directed graphs by using single integer numbers effectively, which is significant to enable canonical (generation of graph instances is unique) and efficient (coding and decoding take polynomial time) encodings for learning and optimization algorithms. To the best of our knowledge, the proposed representations are the first known in the literature.

On k-subset sum using enumerative encoding

Parque, Victor; Parque, Victor; Miyashita, Tomoyuki

2016 IEEE International Symposium on Signal Processing and Information Technology, ISSPIT 2016p.81 - 862017年03月-2017年03月 

DOIScopus

詳細

概要:© 2016 IEEE. Being a significant construct in a wide range of combinatorial problems, the k-subset sum problem (k-SSP) computes k-element subsets, out of an n-element set, satisfying a user-defined aggregation value. In this paper, we formulate the k-subset sum problem as a search (optimization) problem over the space of integers associated with combination elements. And by using rigorous computational experiments using the search space over more than 10 14 integer numbers, we show that our approach is effective and efficient: it is feasible to find any combination with a user-defined sum within 10 4 function evaluations by using a gradient-free optimization algorithm. Our scheme opens the door to further advance the understanding of combinatorial problems by improved/tailored gradient-free optimization algorithms based on enumerative encoding. Also, our approach realizes the practical building block for combinatorial problems in planning and operations research using k-SSP concepts.

書籍等出版物

最適化ハンドブック

最適化ハンドブック

朝倉書店2003年 03月-

エンジニアリングデザイン(第3版)-工学設計の体系的アプローチ-

G. Pahl, W. Beitz , J. Feldhusen , K.H. Grote, 宮下朋之

森北出版2015年 02月-

特許

整理番号:1892

遠隔操作用入力システム(日本)

三浦 智, 上原 瑠哉, 菅野 重樹, 藤江 正克, 宮下 朋之

特願2017-093389、特開2018-190254、特許第6842668号

整理番号:1929

展開型車輪及びこれを利用した走行装置(日本)

宮下 朋之, 江口 航平, 三浦 智

特願2017- 86739、特開2018-184072

整理番号:2004

冷却器(日本)

宮下 朋之, 立石 義博

特願2017-222207、特開2019- 96649

整理番号:2009

冷却器、半導体モジュール(日本, PCT, アメリカ, 中華人民共和国)

宮下 朋之, 立石 義博, 沼田 俊介

特願2018-150206

整理番号:2202

冷却器、半導体モジュール(日本, アメリカ)

宮下 朋之, 大竹 慎吾

特願2019- 72913、特開2020-170820

整理番号:437-JP

冷却器、半導体モジュール(日本)

宮下 朋之, 立石 義博, 沼田 俊介

特願2020-536471

外部研究資金

科学研究費採択状況

研究種別:

臓器の詳細な熱力学・電磁気学モデルを規範とした生体モデルベース熱制御手法の構築

2013年-0月-2015年-0月

配分額:¥3900000

研究種別:

柔軟で簡単に装着可能な服型ウェアラブルロボットの開発

2012年-0月-2014年-0月

配分額:¥3770000

研究種別:

癌凝固メカニズムの医工学的解明と癌形態に応じた電磁場熱凝固治療システムの開発

2011年-0月-2014年-0月

配分額:¥45760000

研究種別:

高精度乳がん治療支援システムの開発

2010年-0月-2013年-0月

配分額:¥18850000

研究種別:

レンダリング・ハードウェアによる製造支援ジオメトリ処理の超高速化

配分額:¥11700000

研究種別:

マルチエージェントによる設計統合化システムの研究

配分額:¥3500000

研究種別:

超大型宇宙構造物を実現する紛体成形技術の構築

2017年-0月-2019年-0月

配分額:¥6500000

研究種別:

曲面形状膜面のらせん折りによる新たな折り畳み技法と展開特性の把握

2016年-0月-2018年-0月

配分額:¥3640000

研究種別:

宇宙大型膜面上の通信システム構築を目指した電波-構造同時最適設計手法の構築

2018年-0月-2021年-0月

配分額:¥4550000

研究種別:

ヒトの身体性に柔軟に協調するインタフェースの制御手法の構築

2020年-0月-2023年-0月

配分額:¥36920000

学内研究制度

特定課題研究

金属スペースデブリの蒸発による非デブリ化

2018年度共同研究者:三浦智, パルケ・ビクター

研究成果概要:宇宙空間に存在する構造物の非デブリ化を可能とする新たな技術を構築するものである。宇宙空間における高真空環境及び輻射熱入出力が支配する特徴を活かして、熱環境(断熱・輻射)を最大限に活用し、構造物の主要材料であるアルミニウムを気化温度...宇宙空間に存在する構造物の非デブリ化を可能とする新たな技術を構築するものである。宇宙空間における高真空環境及び輻射熱入出力が支配する特徴を活かして、熱環境(断熱・輻射)を最大限に活用し、構造物の主要材料であるアルミニウムを気化温度へ到達させ、宇宙空間に放出するものである。地上においての既存技術を活用し以下のような検討を実施した。①非デブリ化対象衛星への熱源素子の取り付け方法の考案 機能停止した人工衛星は回転運動しており、その衛星を非デブリ化するための機器を設置する技術の考案及び好適の検討②高真空環境及び輻射熱入出力環境におけるアルミニウムの気化手順および条件の明確化 高真空環境において、太陽光にによる輻射熱入力を効果的に利用することによるエネルギを低減した加熱方法の検討③気化したアルミニウムの飛散管理手法の確立 宇宙空間において、構造物の破壊を生じさせないデブリの粒子寸法として粒径が0.1mm以下であるという基準を充足することが必要である。一方、この飛散粒子をイオン化して電場を通して加速することにより、イオンエンジンと同様の原理により推力を得ることができる。イオンエンジンを机上検討及び試作を実施し、発生させたイオン状アルミニウムによる効果を見積もった。

螺旋折絆創膏の設計手法に関する研究

2018年度共同研究者:三浦智, パルケ・ビクター

研究成果概要:近年,内視鏡下外科手術は低侵襲な治療方法として,身体に設置したトロッカーを介した内視鏡の視野下で,体内組織の治療やその後処置(組織接着,止血,癒着防止等)を行う.通常の開腹手術では,可吸収性のシート剤を貼付することで簡便な後処置を...近年,内視鏡下外科手術は低侵襲な治療方法として,身体に設置したトロッカーを介した内視鏡の視野下で,体内組織の治療やその後処置(組織接着,止血,癒着防止等)を行う.通常の開腹手術では,可吸収性のシート剤を貼付することで簡便な後処置を行うことが多い.しかし,内視鏡下外科手術ではトロッカー内部の弁や作業空間の狭さから,シート剤を対象患部に送達するには工夫が求められる. 本研究では,折り畳みによる体内貼付シートの収納を検討し,優れた収納性と展開性を持つ内視鏡下外科手術での利用法を提案することを目的とした.展開実験により、 螺旋折りを施す膜面の角数,収納した際の相対高さ,アプリケータの筒から展開部までの突出し長さを設計変数として実験計画法を実施した.得られた実験点に対して625[mm2 ], 1250[mm2],1875[mm2]の3種類の面積でそれぞれ3回の実験を行い,その平均を元に最適化を実施した.目的関数は収納体積,収納可能面積(筒の内径に収納できる面積の最大値),展開率,引張力,総突出し長さ(突出し長さと脚長を合わせた長さ) とした. 

触診術の定量的評価及び機械システムによる支援方式に関する研究

2019年度

研究成果概要:本研究では, 臓器の機械的特性をオンライン 同定するシステムを構築することを目的と する.ここで,以下二つの点に着目する.一点目は, 実臓器の形状から実環境に適した有限要素臓器モデルの構築である. 多くの従来研究では,長方形の単純...本研究では, 臓器の機械的特性をオンライン 同定するシステムを構築することを目的と する.ここで,以下二つの点に着目する.一点目は, 実臓器の形状から実環境に適した有限要素臓器モデルの構築である. 多くの従来研究では,長方形の単純なモデルを扱っているが, 本研究では,実際の豚肝臓から形状を生成したものを用いる. 二点目は臓器の材料特性 を求めることにより,正常部と腫瘍の両方を 同定することである.以上の目的を達成するために,本論文では, ,(肝臓モデルの数値実験, ,( ファントムを用いた物理実験の二つの実験を実施する.以下に各実験の概要を示す.(1)肝臓モデルの数値実験仮想環境上で肝臓の有限要素モデルに対して外力を与え,予め仮定した材料特性を推定する.(2)ファントムを用いた物理実験提案する手法の妥当性を確認するために,ファントムに対して外力を与え,測定した材料特性と推定された材料特性を比較する.肝臓モデルの数値実験では,肝臓の材料特性を同定するために肝臓の有限要素モデルに粒子フィルタを利用したデータ同化を適用した.Mooney-Rivlinの超弾性モデルを利用し,5つの材料定数を推定した.肝臓の有限要素シミュレーションモデルに観測した変位データと肝臓の初期条件を定義し,状態空間モデルに対して不確実性を伴う部分に確率密度関数を加え,粒子フィルタを用いて予測・フィルタリングを行い,尤度関数を最大とするパラメータを推定値とした.予め定義した材料特性を推定する双子実験を行い,材料特性は予め定義した材料特性に収束したため,粒子フィルタを用いたデータ同化を臓器の材料特性同定に優れる手法として決定した. また,提案した手法の妥当性を確認するために,ファントムを使用した物理実験を実施した.臓器モデルとして,腫瘍を内包した直方体ファントムを利用し,正常部と腫瘍部(直径20[mm]の球体)で弾性率を変化させ,それぞれの弾性率を推定した.ファントムを変形させるために,球体で鉛直に押し込み,3つのロードセルで力を観測した.また,レーザ変位計で押し込み量の変位データを取得し,ファントムの変形・力データからシミュレーションと融合することで,弾性率を推定し,自動的に弾性率を逐次更新するシステムを構築した.本システムによって同定された弾性率とレオメータによって測定された弾性率を比較した.データ同化によって推定された弾性率は正常部で15.85[kPa],腫瘍部で58.50[kPa]となった.一方,測定された弾性率は正常部で16.61[kPa],腫瘍部で53.37[kPa]となった.正常部と腫瘍部でそれぞれ相対誤差は4.58[%],9.61[%]となった.

多重らせん折収納膜面の展開機構の考案と宇宙実証

2020年度共同研究者:Parque VICTOR, 三浦 智

研究成果概要:平面の膜面を収納するために、従来の円筒形状を変更し、角柱形状に収納する方法を考案した。さらに、角柱に巻き付く方向を逆転する方法を考案し、展開を容易に角柱形状へ収納する方法を考案した。展開においてはコンベックスrテープを使用して、展...平面の膜面を収納するために、従来の円筒形状を変更し、角柱形状に収納する方法を考案した。さらに、角柱に巻き付く方向を逆転する方法を考案し、展開を容易に角柱形状へ収納する方法を考案した。展開においてはコンベックスrテープを使用して、展開する方法を検討し実証した。また、複数のらせん折形状の膜面を接続し、より大きな平面を複数の角柱形状に収納して展開する方法を提案し実証した。宇宙における実証については、革新3号機への実施プロジェクトへ応募し採択され、考案した膜面を搭載した人工衛星をイプシロンロケットによる打上げる契約を締結し、人工衛星を製作中である。

グラフィックスハードウエアを用いた簡便な有限要素解析計算法の構築

2006年度

研究成果概要:本研究は,従来はコンピュータの中央演算装置(CPU)が担っていた計算機能の一部をグラフィックハードウエア(GPU)を活用し計算効率を向上させることを目的としている.構造解析を対象とし,形状変化の運動方程式の求解と,材料配置に関する...本研究は,従来はコンピュータの中央演算装置(CPU)が担っていた計算機能の一部をグラフィックハードウエア(GPU)を活用し計算効率を向上させることを目的としている.構造解析を対象とし,形状変化の運動方程式の求解と,材料配置に関する位相最適化問題を取り扱った.形状変化の運動方程式の求解については,3次元立体について,CPUのみ処理時間及び商用解析ソフトウエアとの比較検討を行い,約10倍の速度向上が明らかになった.また,材料配置に関する位相最適化問題については,2次元画像を対象に従来手法と同様な結果を得ることが確認できた.

免疫エージェントによる最適設計に関する研究

2000年度

研究成果概要: 機械構造物の設計においては、複数の指標の向上を実現する設計解を、多くの制約条件を充足するように見出す必要がある。その設計解を求める手段として数理計画法が用いられている。一方、自然界に目を向けると、多くの制約が存在する自然環境にお... 機械構造物の設計においては、複数の指標の向上を実現する設計解を、多くの制約条件を充足するように見出す必要がある。その設計解を求める手段として数理計画法が用いられている。一方、自然界に目を向けると、多くの制約が存在する自然環境において、多くの外的要因から生命の維持を実現している生命体が存在する。自然界における最適性を実現する仕組みとして、ほ乳類の持つ免疫機構が存在し、非常に多くの種類からなる抗原から、細胞体の維持を実現するために、抗体が大きな役割を果たしている。本研究では、この点に着目し、エージェント技術により、免疫機構をモデル化して、そのうち、抗原-抗体反応を利用して最適設計を行う方法として検討することを目的とする。ここでは、設計対象となる構造物の風荷重や地震などの外的要因を抗原と考え、部材配置や寸法などを内的要因として設計において定めるパラメータ(設計変数)を定める手法として、新たに提案した。いくつかの計算例によって、既存手法と比較することによりいくつかの点が明らかになった。(1)寸法最適化問題および位相最適化問題において、構造物の外的要因のうち、最も構造物の設計指標の悪化を最小限にとどめることができる設計案を導出できることがわかった。(2)多様な抗原に対する防御システムであるため、複数の極値を持つ多峰性の設計問題の場合においては、複数の局所的最適解を導出でき、単峰性の設計問題の場合には、最適解が求まることに加え、その周辺の解を導出でき、設計変更において、最適解が利用できず再計算を実行しない場合に、次善の解として利用できることがわかった。一方、計算中において設計候補の評価回数が多く必要となる欠点が認められた。この点を克服するために、(1)設計変数に関する目的関数や制約条件の感度を利用する種類の既存手法と組み合わせた計算法の構築や(2)応答局面法による近似的な局面生成技術を検討することが必要であると考えられ検討を加えている。

エージェントベース協調設計法に関する研究及び協調設計システムの開発

2001年度

研究成果概要:複数の設計者が複数の異なる技術分野に属するような複合領域における設計問題においては,競合した設計要求や設計指標の協調をはかり設計候補を絞ることが重要であることをまず指摘した.ここでは,技術領域が複合するために設計指標間の比較や単一...複数の設計者が複数の異なる技術分野に属するような複合領域における設計問題においては,競合した設計要求や設計指標の協調をはかり設計候補を絞ることが重要であることをまず指摘した.ここでは,技術領域が複合するために設計指標間の比較や単一化の困難が生じるために,単一化可能な合理的な評価尺度を構築するためにデータ包絡分析法を工学問題に適用する工夫を施した方法を提案した.さらに,設計者の妥協を形成するために妥協案を算出する方法を提案した.これらの提案した方法に加え,設計者の妥協状況を判定する方法を提案し組み合わせることにより,妥協のための各種の情報を設計者に提示する擬人的な設計者をスーパバイズエージェントとして,コンピュータネットワークを利用したシステムとして開発した.すなわち,コンピュータネットワークを介して設計問題を地理的に分散する設計者や解析ソフトウエアなどの人的および物的資源を統合したシステムを開発している.提示した設計案の評価方法により得た評価値を向上する設計案を設計者に提示するよう要求することにより,競合する設計者間が妥協する設計案が得られることが明らかになり,スーパバイズエージェントが提示する妥協案を参考とすることにより,設計者の妥協形成に寄与できることを明らかにした.さらに,交渉状態に応じた妥協情報の提示度合いを変化させることにより,特に設計初期における妥協する意志の無い状況における妥協情報の提示の抑制が可能なこと,妥協が進まなくなった状況の設計者に対する設計案に近い妥協案を提示することにより,さらに妥協を進めることができることが明らかにした.また,実際の設計を行う場合に有用である商用解析ソフトウエアと最適化アルゴリズムを接続するソフトウエア部品を開発し,商用解析ソフトウエアの利用が可能となるとともに,各種,最適設計システムの構築において利用可能であることを確認した.

グラフィックスハードウエアを用いた有限要素法の高度化に関する検討

2005年度

研究成果概要:本研究は,従来はコンピュータの中央演算装置(CPU)が担っていた計算機能の一部をグラフィックハードウエア(GPU)を活用し計算効率を向上させることを目的としている.特に,構造解析問題を対象とし,与えられた荷重・境界条件より,2次元...本研究は,従来はコンピュータの中央演算装置(CPU)が担っていた計算機能の一部をグラフィックハードウエア(GPU)を活用し計算効率を向上させることを目的としている.特に,構造解析問題を対象とし,与えられた荷重・境界条件より,2次元応力場における基礎式を充足する解を導出することになる.本研究では,この基礎式を満足するための計算法としてセルオートマトン理論を利用し,GPUで計算を可能とするデータ構造を提案し,実際に計算実験を行った.構造形態を示すデータは,その形状を表す画像データとして与え,その画像に境界条件,荷重条件を示す特異な画像を挿入することにより計算が可能となり,画像取得にはデジタルカメラなどの映像機器の利用が可能であることから利便性を有するものである.さらに,構造形状を決定するために従来より用いられている最適設計法の検討を試み,学会発表を行った.一方で,ハードウエアによる計算時間の短縮は近年のCPUの計算速度の向上に伴うことが考慮されるが,わずかながらの向上にとどまっている.一方で,3次元データへの拡張を試みた.ここでは,MRIで取得される積層画像を対象として,計算可能とするデータ構造を考案した.実装するにあたり,動的問題への拡張への必要性を認識し,その点を考慮しデータ構造を考案した.この部分に関しては,現在,計算実験中であり,その成果が得られ次第に発表を行う予定である.

FPGAを用いた粘弾性物質保持システムの構築

2008年度

研究成果概要:近年,コンピュータの性能向上に伴い,大規模な有限要素モデルの取扱が可能となりつつあり,従来は計算が困難であった現象の解析や計算時間が短縮され,設計工程へ有限要素法を実装した机上シミュレーションソフトウエアの導入も進んでいる.コンピ...近年,コンピュータの性能向上に伴い,大規模な有限要素モデルの取扱が可能となりつつあり,従来は計算が困難であった現象の解析や計算時間が短縮され,設計工程へ有限要素法を実装した机上シミュレーションソフトウエアの導入も進んでいる.コンピュータの基本性能の向上に加え,ハードウエアも進歩が見られ,例えば,グラフィックスハードウエアやFPGA(Field Programmable Gate Array)に作成したプログラムを転送し高速に実行できる環境が整いつつある.本研究では,有限要素法をFPGAを用いて高速に実行可能とすることを目的とし,特にロボットなどの動作機械におけるダイナミクスの推論エンジンとして活用することを視野に入れ,特に,ロボットアームにより取扱が困難である“やわらかい”物質の保持や移動を対象にした動作計画を支援するために,有限要素法による計算手順にリアルタイム性を実現できることを目標にアルゴリズム考案やシステム開発を実施し検証を行う.具体的には,(1)FPGA及びFPGA用プログラム開発コンパイラを購入し,運動方程式の求解アルゴリズムのいくつかを実装し計算時間を比較し,(2)既所有の摩擦測定装置を活用したロボットアーム先端及び保持部と粘弾性物質間の摩擦測定を実施する.(3)FPGAの並列性を活用する有限要素法及び時刻暦応答計算の実装方法を検討し実装を行うこととし,(1)運動方程式の求解アルゴリズムとしてRunge-Kutta法,Newmark-b法,Wilson-θ法をソフトウエアのみで実装し,そのなかからFPGAへの実装に適したアルゴリズムの選定を行った.この選定は,単純に移植するのみでは,その計算時間面にて不十分であるとの結論を踏まえて選定し,ルンゲクッタ法を対象とし,さらにルンゲクッタ法の状態行列を対角化し多元の状態更新式を並列に実行できるアルゴリズムを検討した.すなわち,並列化アルゴリズムとして実装することが必要との結論に至った.(2)摩擦測定装置により摩擦を測定し,速度依存項を同定し力学的境界条件の同定を行った.

オンライン同定法による力学情報統合システムの構築

2010年度

研究成果概要:本研究は、材料特性の同定の精度を向上させるため、実際の臓器への力学的作用を明確にする実験中に取得した形状データを使用し、臓器の材料特性の更新を実現した同定法を検討するものである。本年度は、肺構造を対象にし、有限要素モデルの作成およ...本研究は、材料特性の同定の精度を向上させるため、実際の臓器への力学的作用を明確にする実験中に取得した形状データを使用し、臓器の材料特性の更新を実現した同定法を検討するものである。本年度は、肺構造を対象にし、有限要素モデルの作成および準静的粘弾性解析や粘弾性解析などを実施し、材料特性、境界条件および肺構造のモデル化粒度との関連を実際の実験との整合性を考慮し調査した。また、解析手法として収縮要素を効率的に取り扱う方法についても検討を加えた。材料特性は肺胞や気管支の特性の中庸な特性で変形形状を表現できることが確認できた一方で、気管支構造の影響が高く表れる部位が明らかになり、モデル構築への指針を得ることができた。また、摩擦に関する境界条件は大きな影響を及ぼさないことが明らかになった。

医療画像からの力学情報の直接抽出と利用法の開発

2011年度

研究成果概要:画面描写等に必要な計算処理を行う半導体集積回路であるGraphics Processing Unit(GPU)の計算能力は近年飛躍的に向上しており,今日では浮動小数点の計算速度ではCPUを大きく上回っている.このGPUの計算能力を...画面描写等に必要な計算処理を行う半導体集積回路であるGraphics Processing Unit(GPU)の計算能力は近年飛躍的に向上しており,今日では浮動小数点の計算速度ではCPUを大きく上回っている.このGPUの計算能力を画面描写以外の用途で用いることが試みられており,GPGPU(General Purpose computing on GPU)と呼ばれている.GPUは非常に多くのストリームプロセッサを持ち、並列処理でとても高い計算能力を持つ。このことから、動画のエンコーディングや音声処理、フーリエ変換などの並列度の高い計算においてGPGPUを適用することで計算速度を大きく向上させることができる。本研究では、CTやMRIなどの撮像装置より抽出した画像を格子状のセルとセル毎に定められた計算則からなる離散的計算モデルとして、直接に利用する計算法を構築した。すなわち、セルラ・オートマトン法(以下C.A.法)を利用した弾性体の解析手法を提案し、その演算の並列性に注目し、GPUによる高速演算による処理を可能とした。特に、本研究では、C.A.法を用いた粘弾性体のクリープ解析手法を提案し、更にCUDAに適用することで高速化を目指す。粘弾性の代表的なモデルとしてフォークトモデル(Voigt Model)とマクスウェルモデル(Maxwell Model)の2つが挙げられる。本研究ではクリープ解析挙動を表現することに適しているフォークトモデルとして定式化した。 C.A.法で使用する状態遷移式は解析対象を細分化した微小物体の運動を考えることで立式し、離散化することで導出することができ、解析対象の内部、表面などの境界条件によって遷移式を用意する必要がある。そのため、解析方法は基本的には弾性体の解析と同じであるが、粘性項を含むことにより変位の時刻暦応答依存を解き定式化した。C言語とCUDAにて作成したプログラムを用いて提案手法GPGPUによる解析結果、時間について考察した。GPGPUを適用することで、GPUのマルチプロセッサを生かした並列度の高い演算をすることができるようになる。立方体を模擬したセルに対して初期変位を与え、クリープ挙動を見る解析を行い、その際の解析時間と解析精度を比較した。C言語とCUDA双方の解析において、同様の結果を得ることが出来た。また、解析速度は、セル数が多く計算量が多くなるほどCUDAが高速という結果を得ることができ、提案手法の有効性を確認した。

初期設計段階における設計評価の統合に関する研究

2013年度

研究成果概要:機械構造物の設計では、市場調査の後、概念設計、基本設計、詳細設計、生産設計などの段階を経て、その形状が決定されていく、さらに近年では、構造物の生産、消費、廃棄などの生産・消費活動における機械構造物の役割を十分に想定した設計が求めら...機械構造物の設計では、市場調査の後、概念設計、基本設計、詳細設計、生産設計などの段階を経て、その形状が決定されていく、さらに近年では、構造物の生産、消費、廃棄などの生産・消費活動における機械構造物の役割を十分に想定した設計が求められ、実際の市場評価と統合され製品設計にフィードバックされる。このように各種の事柄を精度よく想定することが必要となり、さらに、各種の事柄の同時成立性を考慮した唯一の製品を設計していくことが必要となる。このため、通常は構造物の特性は多くの事柄が密接に関連し、設計の評価は、多くの視点より多次元に評価されることになる。複数の評価尺度が適用される機械構造物の設計では、近年のリードタイムの短縮への要求に伴い、設計の初期段階である概念設計における精度の良い設計評価を実施することが設計手戻り低減にともなうリードタイム短縮を可能とし、さらに、円滑な設計工程の進捗に寄与するものと考えられる。そこで本研究では、設計者及び市場の満足度を考慮した設計支援法の構築を目的とする。平成25年度は、設計者の選好や顧客のニーズを含めた設計への満足度に影響する要因項目より満足度を算出する満足度関数(下図左)を定義する。これを利用した設計者の意思決定支援法(下図右)を改良・考案し、設計実験を実施し評価することを目的とし,車両構造物を対象として,以下の方法を提案し,計算実験を実施した.適用対象構造物として,車両構造物を選定し,その設計変数となる設計指標を選定した.車両構造物が有する機能構造および評価指標の明確化のため,Design Structure Matrix法により構造物が有する設計指標の関連を設計者による一対比較により明確にした。一般的には,設計指標は定量的に表現できるものが多く,その増減の場合を分け,関係性を明確にした.明確にされた構造をもとに,シグモイド関数関数を用い満足度関数を定式化した.車両構造物の性能評価には,非線形有限要素法を適用し導出し、衝突安全性の観点から,評価され定量化した。(4)多目的最適化手法による評価実験満足化トレードオフ法により,満足度関数を目的関数として,車両の構造設計問題ついて適用した.通常は物理量により直接に表現される目的関数により評価されパレート解が得られ,その後に,設計者の主観を活用した評価がなされる.この評価過程およびトレードオフ分析により,希求水準の試行錯誤が行われ,最終的な選好解が決定されていく.本研究での提案手法により,この試行錯誤が減少する効果が認めれた.

衝撃荷重が作用する縮小人体モデルの構築

2013年度

研究成果概要:機械構造物が社会の中において重要な役割を果たし,多くの人間との接点を持つ状況で,機械が所望される機能と性能を実現するために,設計者は安全性を十分に考慮するようになっている。しかしながら,人間と機械の特性の相違が顕著となる衝撃荷重が...機械構造物が社会の中において重要な役割を果たし,多くの人間との接点を持つ状況で,機械が所望される機能と性能を実現するために,設計者は安全性を十分に考慮するようになっている。しかしながら,人間と機械の特性の相違が顕著となる衝撃荷重が作用する状況や一度に多くの人員が相互に接触する状況が発生し,座席等の機械設備とも力学的な相互作用を発現し,人体の損傷に影響する状況を十分に設計時に加味することは容易ではない.解析技術では計算規模が大きく,考慮すべき境界条件,荷重条件へロバストに適応する必要があり,計算負荷が高い.一方で,実験技術においては,実物が大きい場合には,その取扱いや実験の実施には多大な費用と時間が要する.従来の縮小モデルでの衝突事件で用いられた人体モデルは,衝突時の各身体部位の変形が考慮されていない簡易なモデルであった.そこで本研究では,相似則を用いて設計した人体ダミーモデルをラピッドプロトタイピングにより製作し,衝突時の応答特性の評価を行った.評価は側面衝突用ダミーの生態忠実性について記されたISOのテクニカルレポートTR9790(3)に従って行った.また,皮膚や筋肉を模擬した軟組織を付けたモデルに対して有限要素法解析によるダミー評価試験のシミュレーションを行い,ダミー胴体のリブの幅,胸部を覆う軟組織の厚み,軟組織の弾性係数を設計変数として応答波形の最適化を行った.最適化されたモデルを再びラピッドプロトタイピングにより製作し,評価実験を行うことで解析との整合性の確認と,生態忠実性の向上を確認した. 相似則を用いて縮小ダミーを設計・製作し,ISOのテクニカルレポートに従って胸部,腰部,腹部の生態忠実性の評価試験を行ったところ,ダミー全体で10点満点中4.615点,5段階評価にすると上から3番目の「Fair Biofidelity」という評価であった.部位ごとに見ると胸部の生態忠実性が特に低かったため,皮膚を模擬した軟組織を導入し,リブ幅,軟組織の厚み,軟組織の弾性係数を設計変数として解析による最適化を行った.その結果,胸部インパクト試験の応答波形の最大荷重を30.4%だけ応答目標に近づけることができた.また,ラピッドプロトタイピングで製作した最適化ダミーでも評価試験を行い,最適化前のモデルと比べて最大荷重が34.3%応答目標に近づいた. 以上より,人体ダミーモデルの定量的評価と,解析を用いた最適化による人体モデルの改善に成功した.

螺旋折絆創膏による簡便な体内の封止システムの開発

2019年度

研究成果概要:近年,内視鏡下外科手術は低侵襲な治療方法として注目されている.この手術では,身体に設置したトロッカーを介した内視鏡の視野下で,体内組織の治療やその後処置(組織接着,止血, 癒着防止等)を行う.通常の開腹手術では,可吸収性のシート剤...近年,内視鏡下外科手術は低侵襲な治療方法として注目されている.この手術では,身体に設置したトロッカーを介した内視鏡の視野下で,体内組織の治療やその後処置(組織接着,止血, 癒着防止等)を行う.通常の開腹手術では,可吸収性のシート剤を貼付することで簡便な後処置を行うことが多い.しかし,内視鏡下外科手術ではトロッカー内部の弁や作業空間の狭さから, シート剤を対象患部に送達するには工夫が求められる.代表的な工夫として,円筒状に丸めて小さく収納する方法,硬度のあるものと共に送達する方法等が挙げられる[1].しかし, 対象組織以外との接着の危険性や異物回収の必要性があり,確立された方法はない.そこで、本研究では,折り畳みによる体内貼付シートの収納を検討し, 優れた収納性と展開性を持つ内視鏡下外科手術での利用法を 提案することを目的とした.(1) 提案技法体内で対象組織以外との接着を防ぐには,効率の良い収納方法が望まれる.従来の円筒状に丸める方法では,円筒の高さ方向の収納ができない.そこで,全方向に収納可能な螺旋折を体内貼付シートに施すことを提案した.螺旋折りを施した膜面は,小さな円筒形状に収納され,両端を引張り展開する.螺旋折りを施した膜面の簡便な展開が可能な4 本脚アプリケータの設計をした.体内貼付シートを紙の内部に重ね折りして,アプリケータと紙を接続することで, 展開時にシートのみを分離することとした。 (2) 展開実験と寸法最適化展開実験では,滑車に吊るした荷重によりアプリケータの糸に張力を付加して,4本脚及び体内貼付シートを展開させた. シートが紙から分離するときの展開率と引張力を測定した.体内貼付シートは可吸収性止血剤の SURGICEL®(Johnson & Johnson)を使用した.螺旋折りを施す膜面の角数,収納した際の相対高さ,アプリケータの筒から展開部までの突出し長さを設計変数として実験計画法を実施した.得られた実験点に対して 625[mm2 ],1250[mm2],1875[mm2]の3種類の面積でそれぞれ3回の実験を行い,その平均を元に最適化を実施した.目的関数は収納体積,収納可能面積(筒の内径に収納できる面積の最大値),展開率,引張力,総突出し長さ(突出し長さと脚長を合わせた長さ) とした.展開実験の結果,収納体積と展開率・収納可能面積,引張力と総突出し長さの間にはそれぞれトレードオフの関係があった.そのため,それぞれを満足化する条件として四角形,相対高さ 34.0%,突出し長さ 23.0[mm]を選定した.この条件で展開実験を実施した結果,収納体積 538[mm3],展開率 69.8%,引張力 558[gf]を得た.応答曲面による予測値との誤差率はそれぞれ 1.76%,3.98%,2.88%であり,正常に応答曲面の近似と実験が実施されていることが確認できた.面積が 1875[mm2]の時の折り目と展開実験結果を以下に示す.体内貼付シートを螺旋折りにより収納し,4本脚アプリケータにより展開させる方法を提案した.優れた収納性と展開性を得るために,螺旋折りのパラメータとアプリケータの寸法を展開実験の結果によって最適化できた.

超小型人工衛星による薄膜展開構造の実証研究

2015年度

研究成果概要:外形約12cm四方である超小型人工衛星の打ち上げが2016年度に予定している.衛星開発に必要な材料及び試験環境の構築を実施した.使用材料は米国軍事規格材料の使用が要求されており,一定の費用を充当し購入した後に衛星機体の製造を完了し...外形約12cm四方である超小型人工衛星の打ち上げが2016年度に予定している.衛星開発に必要な材料及び試験環境の構築を実施した.使用材料は米国軍事規格材料の使用が要求されており,一定の費用を充当し購入した後に衛星機体の製造を完了した.一方で,本衛星の重要な機能である直径約80cmの曲面らせん折り膜面の展開のため,真空環境試験環境の整備と試験を実施した.曲面らせん折り膜面はミウラ折りを発展させ,当研究室において改良が施されたものであり,宇宙空間での実証は世界初となるものである.また,LCDパネルを搭載し,熱輻射の入出力を制御する機能を有し,この点においても宇宙空間の実証は世界初となるものである.

モデル予測制御法を用いた熱治療における組織凝固領域の状態推定アルゴリズムの導出

2015年度共同研究者:山川宏, 藤江正克

研究成果概要:焼灼された生体組織の凝固に伴い硬化する特性に着目し,温度が異なる環境で粘弾性率を測定した.粘弾性率が急激に増加する境界温度が,肝臓の主要成分であるタンパク質の不可逆的変性温度に近く,粘弾性率が凝固の指標として有用性を確認した.焼灼...焼灼された生体組織の凝固に伴い硬化する特性に着目し,温度が異なる環境で粘弾性率を測定した.粘弾性率が急激に増加する境界温度が,肝臓の主要成分であるタンパク質の不可逆的変性温度に近く,粘弾性率が凝固の指標として有用性を確認した.焼灼条件の昇温速度が異なる場合組織の粘弾性率の温度依存性が異なった.さらに,生体組織の変性状態に応じたエネルギの導出を目的として生体組織の熱容量を用いて変性状態の推定手法を提案した.示差走査熱量測定を用いてラジオ波焼灼したブタ肝臓組織の熱容量の測定結果では電極針の近傍組織のみの熱容量の結果にピークが表れ,熱容量のピークの有無によって組織の可逆と不可逆的変性が判別できた.

超小型人工衛星WASEDA-SAT3の各種試験による性能評価

2016年度

研究成果概要:超小型人工衛星WASEDA—SAT3の開発に際して,各種の試験を実施した.振動試験,熱真空試験,環境適合性試験を実施し,機能動作試験及び総合試験を実施した.このための運搬作業・学外試験場を利用した振動試験および試験による修繕・改良...超小型人工衛星WASEDA—SAT3の開発に際して,各種の試験を実施した.振動試験,熱真空試験,環境適合性試験を実施し,機能動作試験及び総合試験を実施した.このための運搬作業・学外試験場を利用した振動試験および試験による修繕・改良作業・成果公表などへの本支援を受けた.本衛星では,以下の2点において,新たな試みを実施している.一つは,パラボラ曲面のらせん折り様式による収納された膜面の展開実験であり,二つは,LCDパネルの稼働・非稼働による輻射熱流出量の制御の実験である.膜面の形状確認のため,小型プロジェクタ及びカメラを搭載し,公募映像を搭載している.JAXAへの受け渡しが完了し,ISSへの輸送あとに,ISSより放出された.

ラジオ波焼灼療法における力学特性を活用した柔軟針の穿刺操作と焼灼制御

2016年度共同研究者:三浦智

研究成果概要:ラジオ波焼灼療法では,電極を患部付近に伸展させ通電させ,患部を焼灼する手技である.侵襲が少なく手術が可能であるものの,電極を的確な位置に配置することや通電する電力を的確に制御することが患部に位置する悪性細胞の焼灼の確率を高め,周辺...ラジオ波焼灼療法では,電極を患部付近に伸展させ通電させ,患部を焼灼する手技である.侵襲が少なく手術が可能であるものの,電極を的確な位置に配置することや通電する電力を的確に制御することが患部に位置する悪性細胞の焼灼の確率を高め,周辺の正常細胞の確保の確率が高まる.そこで,本研究では,(1)力学情報を用いた患部の位置同定,(2) 柔軟性を有する針を患部位置に到達させる力学的作用様式の検討,(3)針に通電させる電力の制御を目的として検討を進めた.

海外研究活動

研究課題名: 解析手法の高度化及びその応用に関する研究

2011年03月-2012年02月

機関: マサチューセッツ工科大学(アメリカ)、(マラヤ大学)(マレーシア)

外国人研究者等の受入れ状況

2016年03月-2016年09月

受入者の所属元機関:日本エジプト科学技術大学(エジプト)

現在担当している科目

科目名開講学部・研究科開講年度学期
ビジュアルシンキング創造理工学部2021春学期
ビジュアルシンキング  【前年度成績S評価者用】創造理工学部2021春学期
マテリアルメカニクス創造理工学部2021春学期
マテリアルメカニクス  【前年度成績S評価者用】創造理工学部2021春学期
デザインエンジニアリング創造理工学部2021秋学期
デザインエンジニアリング  【前年度成績S評価者用】創造理工学部2021秋学期
マシニングラボ(A組)創造理工学部2021春学期
マシニングラボ(B組)創造理工学部2021春学期
マシニングラボ(A組) 【前年度成績S評価者用】創造理工学部2021春学期
マシニングラボ(B組) 【前年度成績S評価者用】創造理工学部2021春学期
アドバンストマテリアルメカニクス創造理工学部2021秋学期
アドバンストマテリアルメカニクス  【前年度成績S評価者用】創造理工学部2021秋学期
Mechanical Engineering Laboratory Fundamentals (Japanese)創造理工学部2021春学期
メカニカルエンジニアリングラボF創造理工学部2021春学期
メカニカルエンジニアリングラボF  【前年度成績S評価者用】創造理工学部2021春学期
Mechanical Engineering Laboratory Advanced (Japanese)創造理工学部2021秋学期
メカニカルエンジニアリングラボA創造理工学部2021秋学期
メカニカルエンジニアリングラボA  【前年度成績S評価者用】創造理工学部2021秋学期
プロダクションプラクティス(A組)創造理工学部2021秋学期
プロダクションプラクティス(B組)創造理工学部2021秋学期
プロダクションプラクティス(C組)創造理工学部2021秋学期
プロダクションプラクティス(D組)創造理工学部2021秋学期
プロダクションプラクティス(A組) 【前年度成績S評価者用】創造理工学部2021秋学期
プロダクションプラクティス(B組) 【前年度成績S評価者用】創造理工学部2021秋学期
プロダクションプラクティス(C組) 【前年度成績S評価者用】創造理工学部2021秋学期
プロダクションプラクティス(D組) 【前年度成績S評価者用】創造理工学部2021秋学期
ゼミナール創造理工学部2021通年
ゼミナール  【前年度成績S評価者用】創造理工学部2021通年
エンジニアリング・プラクティス創造理工学部2021通年
エンジニアリング・プラクティス  【前年度成績S評価者用】創造理工学部2021通年
卒業論文・計画創造理工学部2021通年
卒業論文・計画  【前年度成績S評価者用】創造理工学部2021通年
Control and Design of Space Structures (Japanese)創造理工学部2021秋学期
宇宙構造の設計と制御創造理工学部2021秋学期
Space Science and Technology (Japanese)創造理工学部2021秋学期
宇宙科学技術創造理工学部2021秋学期
構造動力学特論創造理工学部2021春学期
構造物のダイナミクス創造理工学部2021秋学期
人工衛星設計PBL A創造理工学部2021春学期
人工衛星設計PBL B創造理工学部2021秋学期
Graduation Thesis A創造理工学部2021秋学期
Graduation Thesis A 【S Grade】創造理工学部2021秋学期
Graduation Thesis B創造理工学部2021春学期
Graduation Thesis B [S Grade]創造理工学部2021春学期
Manufacturing of Space Structures創造理工学部2021春学期
Mechanical Engineering Laboratory A創造理工学部2021春学期
Mechanical Engineering Laboratory B創造理工学部2021秋学期
Material Mechanics Fundamentals創造理工学部2021秋学期
Material Mechanics for Mechanical Design A創造理工学部2021秋学期
Material Mechanics Fundamentals [S Grade]創造理工学部2021秋学期
Seminar A創造理工学部2021春学期
Seminar A創造理工学部2021春学期
Seminar A [S Grade]創造理工学部2021春学期
Engineering Practice A創造理工学部2021春学期
Engineering Practice A創造理工学部2021春学期
Engineering Practice A [S Grade]創造理工学部2021春学期
Seminar B創造理工学部2021秋学期
Seminar B創造理工学部2021秋学期
Seminar B [S Grade]創造理工学部2021秋学期
Engineering Practice B創造理工学部2021秋学期
Engineering Practice B創造理工学部2021秋学期
Engineering Practice B [S Grade]創造理工学部2021秋学期
Seminar C創造理工学部2021春学期
Seminar C創造理工学部2021春学期
Engineering Practice C創造理工学部2021春学期
Engineering Practice C創造理工学部2021春学期
Graduation Thesis Spring創造理工学部2021春学期
Graduation Thesis Fall創造理工学部2021秋学期
Material Mechanics Advanced創造理工学部2021春学期
Material Mechanics for Mechanical Design B創造理工学部2021春学期
Design and Control of Space Structures創造理工学部2021集中講義(秋学期)
Design and Control of Space Structures創造理工学部2021集中講義(秋学期)
Design Optimization of Space Structures創造理工学部2021集中講義(秋学期)
Design Optimization of Space Structures創造理工学部2021集中講義(秋学期)
Thermal Design of Space System創造理工学部2021秋学期
Thermal Design of Space System創造理工学部2021秋学期
デザインエンジニアリング大学院基幹理工学研究科2021秋学期
デザインエンジニアリング大学院創造理工学研究科2021秋学期
デザインエンジニアリング大学院先進理工学研究科2021秋学期
Research on Design of Mechanical Systems大学院創造理工学研究科2021通年
システムデザイン研究大学院創造理工学研究科2021通年
フィールドロボティクス研究大学院創造理工学研究科2021通年
デザインジェネレーション研究大学院創造理工学研究科2021通年
創造的構造・機構の研究大学院創造理工学研究科2021通年
宇宙構造の設計と制御大学院創造理工学研究科2021秋学期
機械構造の最適化/満足化設計大学院創造理工学研究科2021秋学期
デザイン・共創実習A大学院創造理工学研究科2021春学期
デザイン・共創実習B大学院創造理工学研究科2021秋学期
宇宙科学技術大学院創造理工学研究科2021秋学期
最先端ロボティクスにおける論文の分析および議論大学院創造理工学研究科2021春学期@秋学期
Analysis and Discussion of Papers on Advanced Robotics大学院創造理工学研究科2021春学期@秋学期
最先端ロボティクスにおける論文の分析および議論大学院創造理工学研究科2021春学期@秋学期
デザイン科学大学院創造理工学研究科2021秋学期
構造動力学特論大学院創造理工学研究科2021春学期
Seminar on Structural Design A大学院創造理工学研究科2021春学期
構造設計演習A大学院創造理工学研究科2021春学期
Seminar on Structural Design B大学院創造理工学研究科2021秋学期
構造設計演習B大学院創造理工学研究科2021秋学期
Seminar on Structural Design C大学院創造理工学研究科2021春学期
構造設計演習C大学院創造理工学研究科2021春学期
Seminar on Structural Design D大学院創造理工学研究科2021秋学期
構造設計演習D大学院創造理工学研究科2021秋学期
Manufacturing of Space Structures大学院創造理工学研究科2021春学期
Thermal Design of Space System大学院創造理工学研究科2021秋学期
Design and Control of Space Structures大学院創造理工学研究科2021集中講義(秋学期)
Design Optimization of Space Structures大学院創造理工学研究科2021集中講義(秋学期)
システムデザイン研究大学院創造理工学研究科2021通年
フィールドロボティクス研究大学院創造理工学研究科2021通年
体系的ロボット工学特論大学院創造理工学研究科2021秋学期
体系的ロボット工学特論大学院先進理工学研究科2021秋学期
宇宙を考える 1 -自然科学、社会科学を結びつける宇宙への視点-グローバルエデュケーションセンター2021秋クォーター